Specifications

1. For water, csd, hot filling (juice, energy drinks, tea) bottles
2. Capacity: 500-3000BPH
3. CE, UL, ISO certificate

SSW-H2 Hot Filling Fully Automatic Machine

 

 

SSW-H2 automatic stretch blow molding machine with 2 cavities is specially designed to produce PET bottle with high heat resistance for hot filling package such as juice and tea. It adopts multiple blowing to reduce the residual stress, as result; shaped bottle has slight shrinkage during hot filling.

In addition, crystallization varies with different mold design, as a result, the PET bottle produced can stand temperature over 97°C depending on the type of PET material with different crystallization rate. The neck up blowing mode protects the bottle preform from damage during blowing and ensures stable performance.With high strength, good transparency and low production costs, abundant material resource, SSW-H2 plays a big role in hot filling package market.

 

Control system

Together with HITECH Man-Machine Interaction (MMI) control panel with user-friendly, the whole control system presents super performance with precise control, convenient parameter setup, obvious display and reasonable memory.

 

Pneumatic system

Pneumatic system provides the power for SSW-H2's movement. It is equipped with world famous high quality pneumatic components such as Festo from Germany, high precision, long service life and reliable performance are their highlights. Those pneumatic components suppliers' global service network provides the customer their prompt after-sale service locally for their pneumatic products used on SSW-H2

 

Sensor system

SSW-H2 adopts high quality imported sensor & switch system including proximity switch, photoelectric switch, and electronic magnet switch to keep production process going step by step and avoid any possible damage on machine.

 

Heating system

SSW-H2automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving. Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size. Each lamp's horizontal position is adjustable to keep the machine flexible.

 

Technical parameter

TYPE	ITEM	UNIT	SSW-H2 technical data
Container	Product material		PET
	Container volume	L	0.05-2.0
	Theoretic output	Psc/hr	1000
	Preform length	M	50-200
	Max height of bottle	M	320
Molding	Preform inner diameter	mm	15-60
	Bottle diameter	mm	35-110
	Max mold plate dimension (L × W)	mm	380 × 460
	Max mold thickness	mm	200
Air compressor	High pressure compressor	M3/Mpa	1.0/30 × 2sets
	Locking force	KN	170
	Mold opening stroke (adjustable)	mm	200
	Low pressure compressor	M3/Mpa	2.0/30 × 1set
	Air dryer	M3/Mpa	2.0/30 × 1set
	Water Chiller	3HP	3HP× 1set
Main machine electricity	Power	KW	30
	Voltage / frequency	V/Hz	380/50hz
Machine size and weight	Main machine (L × W × H)	M	2.8 ×2.5 × 2.0
	Main machine weight	T	3.8
	Conveyor (L × W × H)	M	1.4 × 1.1 × 1.85
	Conveyor weight	T	0.4
	High pressure compressor (L × W × H)	Kg	1.90 × 0.75 × 1.50 × 1set
	Low pressure compressor (L × W × H)	M	1.85 × 0.75 × 1.50
	High pressure air reservoir tank (D × H)	M	0.70 × 2.25/3.0
	Air dryer (L × W × H)	M	0.85 × 0.50 × 0.95
	Water Chiller	mm	1150×650×1250
	Air filters	Kg	10 × 4pcs
Safety	Auto emergency alarm	Safety inter-locking device