N1070A 7000V 50Ohm for using 1MOhm oscilloscope
Negotiable /Set
Min.Order:1 Set
Guangzhou Dekem Electronic Co., Ltd.
Differential probe N1070A(Active probe,match with any brand's oscilloscope/DMM)
Product Introduction | |||
Product Name | N1070A (7000Vp-p,50MHz) | ||
Short Description | PINTECH N1070A(50MHz X100 X1000 7000Vp-p) | ||
specification | |||
Bandwidth | 50MHz | ||
Accuracy | ±1% | ||
Input Impedance | 10MΩ//2 p F each side ground | ||
Input Voltage | |||
-Swing(into 50 KΩ load) | ±7V | ||
-Offset(typical) | <±5Mv | ||
Input Impedance(Typical ) | 50Ω(for using 1M ohm input system oscilloscope) | ||
Power Supply | |||
-Options | power leads | ||
Length of BNC Cable | 90cm | ||
Length of Input Leads | 30cm | ||
Size (L×W×H) | 69*26*165mm | ||
Weight | 500g | ||
Attenuation Ratio | 1:1000/100 | ||
CMRR(typical) | -80dB@60Hz,-50d B@1MHz | ||
maximum input differential-mode voltage (peak-peak) | |||
Maximum input and ground potential difference( peak-peak ) | 7000V@1/1000& 1/100 | ||
(CMRR) | 1000V rms CATⅢ |