Specifications

1.Scrap Copper Cable Granulator
2.Cable wire Recycling Machine
3. Dry-type
4.Separator machinery
5.Cable wire Recycling

  2015 widely used cable wire granulator machine / Cable wire Recycling Machine    

  

 

 

 Description of  2015 widely used cable wire granulator machine / Cable wire Recycling Machine

cable wire granulator machine / Cable wire Recycling Machine   is one of the pro-environment equipments,this is a cable wire granulator machine / Cable wire Recycling Machine for recycling cablle copper,or saying like this it is mainly used for recycling copper or separate the wire and copper from the scrap wire cable.The cable wire granulator machine / Cable wire Recycling Machine has two type:dry type and wet type.Then your can select as your own needs.

 

  

   

  

 

Advantages and Features:

1. · Suits wide range of Wire/cable:

        Computer wire, Automobile/car wire, Telephone wie, Communication wire&cable etc. 

        Single core, Double core, Multi-core etc.

        We put the waste wire/cable directly in the machine! No matter twisted or tangled together!

        (The diameter should between 0.5-20mm)
      · High efficiency: 99% recycling rate. It can recycle copper/aluminum and plastic at the same time!
      · Energy saving:  cable wire granulator machine / Cable wire Recycling Machine consumes less energy compared with the same products!                

      · Environmental friendly: no water needed and no air pollution! All the dust is collected.

      · Easy operation: easy installation, devices are fixed on the bottom board, easy to move or transport! 

 

    

 

 

Copper granulator process:

 1. Starting:

 Please make sure all the cable wire granulator machine / Cable wire Recycling Machine in good condition. Before getting started, please keep the machine unloaded running for 5-10 minutes.

2. Feed inlet

 Please clear up iron from the mixed cables, avoiding damage to crusher blade.

 3. Fine crushing

 If there is any abnormal noise, please stop and check the crusher. Change different size screen, if the cable wire granulator machine / Cable wire Recycling Machine  is too fine or too much copper without separating from plastic

 4. Vibrating separator

 After curshed, the mixed material will be delivered to vibrating device. The copper fro vibrating separator is complete copper without plastic, while the copper clad from the opposire discharging hole needs to be second crushed.

   

 

Product features of 2015 widely used cable wire granulator machine / Cable wire Recycling Machine   

1.  cable wire granulator machine / Cable wire Recycling Machine Eco-friendly. 

The whole process adopts mechanical power without water or gas, no dust, no pollution.   

2. Incredible recycling rate. 

The test show the recycling rate is up to 99.9%, which is a guarantee of high quality and good market of copper granule processed by our machines.

3. Labor-saving. 

On account of cable wire granulator machine / Cable wire Recycling Machine integrated design and intelligent design, cable wire granulator machine / Cable wire Recycling Machine just needs 1-2 workers to operate, greatly saving your labor cost.

No pollution waste copper wire separator in hot sale     

 

Features of 2015 widely used cable wire granulator machine / Cable wire Recycling Machine      

1. Diameter Range of Wires Processed: 0.5-20mm. 
2. Purity of Granules: 99.9%. 
3. Mounted on common steel base for easy portability. 
4. cable wire granulator machine Easy to move, place and install. 
5. Small dimensions with low power requirements. 
6. Environment-frendly with dust collection system.

     

 

Main technical parameter of 2015 widely used cable wire granulator machine / Cable wire Recycling Machine   :

 

Model	Yuxi-350
Capacity	100-200kg/h
Total Power	17.3KW
Volt	220V,50HZ
Overall Dimension	3.1*2*2.25m
Package Size	3.4*2.27*2.4m
Weight	1.6T
Wire Diameter	0.3mm-25mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

About us :

 

Working Place :

 

About our factory: 

Through 21 years of development and technology innovation, our Zhengzhou Yu Xi Machinery Equipment Co., Ltd. has been developped to a professional manufacturer set design, manufacture, after-sale service

as a whole. In order to meet the different requirements of our customers, we designed and researched many types of charcoal process machines, include charcoal & coal briquette machine, shisha & hookah charcoal

tablet machines, charcoal & coal extruder machines, and biomass charcoal briquette machines, etc.

Besides, we have also got the CE, ISO, SGS, etc, several patents, and for many years, our machines have been sold home and abroad, and are highly praised by our customers, especially the foreign customers such

as Indonesia, Saudi Arabia, Malaysia, India, South Africa, Canada, Australia, Russia, Spain, Greece, Pakiswait, Turkey, Egypt, Sudan, Uzbekistan, Philippines, and other countries.

 

 

Our service for our customers:

 

♥. Pre-sale service: design and manufacture machines for you as your special requirements, provide you with project, process design, and purchase programm.

 

♥. On-sale service: accompany with you to look around our factory, explain the manufacture process of our machines, and check the working performance of our machines.

 

♥. After-sale service: engineers are available to install and debugging equipments of the whole production line, besides, commissioning and training operators on site.

 

 

Contact with us :