Communication equipment:

1.According with IEEE802.3,IEEE802.3u,10/100Base-TX,100Base-FX Fast Ethernet, IEEE802.3x Flow control standard.

2.Interface:SC/ST (50/125um,62.5/125um multimode) SC/FC(9/125um singlemode)

3.Modular configuration design(can be centralize in chassis). 

4.50/125um and 62.5/125um multimode fiber link transmission distance up to 2km.

5.9/125um singlemode fiber link transmission distance up to 120km.

6.Support storage transmission and direct connection mode.

7.Built-in 288KB buffer,storage transmission support 2046Bytes,direct connection mode. support unlimited package.

8.Support full-duplex/half-duplex working mode. 

9.Port support Auto-MDI/MDIX Auto Flip

10.LED indicator dynamix feedback link signal, fault monitoring.

11.Support hot-swappable, plug and play.

12.Support LFP function, automatically detect the link,fored ethernet link interruption when detected in each of interface disconnected.

13.Built-in lightning circuit, significantly reduce the damage caused by thunderbolt induction.

14.Wavelengh:1310nm/1490nm/1550nm

15.Transmission distance:multimode 0.55km/2km  singlemode 20km/40km/60km/80km/100km/120km.

16.Conversion mode:media conversion,strorage transmission/direct connection.

17.MAC address:1K

18.Buffer:288KB

19.Error rate:<1/1000000000

20.LED indicator:POWER,TX Link/ACT(Twisted-pair link),FDX(ethernet full-duplex),FX Link/Act(fiber link), FX100(fiber 100M transmit speed),TX100(Twisted-pair 100M transmit speed).

21.Power supply:DC5V 1A(external power supply);AC220V 0.5A(built-in power supply).

22.Power Consumption:<0.25W.

23.Operating temperature:0~50degree

24.Storage temperature:-40~70degree

25.Humidity:5%~90%(no condensation

26.Size:140*110*30mm(L*W*H)(Built-in power supply)

Connect type: SC
Fiber type: multimode
Wavelengh: 1310nm
Typical distance: 2KM
Min TX PWR: -19.0dBm
Max TX PWR: -14.0dbm
Sensitivity: <-31dbm
Link budget: 12.0dbm