POE Ethernet converter is a power supply device that confirms to the IEEE802.3af/at standard, Which can transmit data signal for some terminals that of based IP, like IP telephone, wireless LAN access pointed AP, Webcam etc, and at the same time, it also can supply DC power for above devices without any change available Ethernet Cat.5 cabling infrastructure, and saving the cost for installing power cables alone.

We select the powerful PSE control chip that is safe and reliable POE automatic identification of function, and the highest power can reach to 30W, it is very suitable for requirements of different application environment for net high definition camera.

Specification and Features:

Confirm to IEEE802.3af/at, IEEE802.3,IEEE803.3u,10/100Base-TX,100Base-FX standards etcs

Support the IEEE802.3x flow control function

Ethernet port support 10/100M,full-duplex/semi-duplex auto-negotiation

Ethernet port support Auto-MDI/MDIX auto flips, parallel /across twised-pair auto-negotiation

Support storage transmission and direct transmission

Low latency data transmit, completely transparent for network protocol.

Link failure alarm(LFP) function

Bulit-in 128KB RAM data buffer, support 2046Bytes long data packet.

9/125um or 62.5/25um multimode fiber link transmission distance up to 2km.

9/125um single mode fiber link transmission distance up to 120km.

Modulization configuration design, chassis support power supply for cassette media converter

Support hot swapping, plug and play

Network medium:

                         10Base-T: Cat.3,Cat.4,Cat.5 UTP (≤100m)

                         100Base-TX: Cat.5 and Above Cat.5 UTP (≤100m)

                         100Base-TX: Cat.5 and Above Cat.5 UTP (≤150m)

8pcs of LED indicator, dynamic feedback link connection state and fault detection.

Bulit-in 8 bit DIP switch, user easily adjust the several of transmission and working mode

Bulit-in lightning protection circuit, significantly reduce the damage caused by thunderbolt induction,IEC6000-4-2(ESD),IEC61000-4-4(EFT),to need IEC61000-4-5(Surge).

Support POE power supply, highest power can be up to 30W.

The style of POE power supply: Mid-span 4/5, 7/8.

System power supply: AC100~265V,50/60Hz, DC48V 1A.

Storage temperature:-65°C to 150°C

Environment temperature:-40°C to 85°C

Relative humidity: 5% to 90%, no condensation

Product Size: 96mm*70mm*25mm (L*W*H)