Product Details

Product Overview:

The Vertical Shaft Impact Crusher is also called Sand Maker, which is high-functioned equipment for making sand and shaping, is researched and produced by our corporation, absorbed with the advanced technology from Germany, and owned advanced world standards. There are two types: rock-on-rock and rock-on-iron. Sand yield of "rock-on-iron" type is higher by 10-20% than that of "rock-on-rock" type.

Application:

It can be widely used for construction material, metallurgical, chemistry, mining, refractory, ceramic, cement, water project, thermal power industry etc., such as iron ore, copper ore, cement, artificial sand, fluorite, limestone, slag, etc.

Technical data:

Model	Max feeding size (mm)	Speed of rotor (r/min)	Capacity (t/h)	Power (kw)	Overall Dimensions (mm)	Weight (kg)
VI-3000	45 (70)	1760-2210	30-60	55-90	308017572126	≤5555
VI-4000	55 (70)	1550-1940	50-90	110-150	410019302166	≤7020
VI-5000	65 (80)	1330-1670	80-150	150-220	430022152427	≤11650
VI-6000	70 (100)	1190-1490	120-250	220-320	530027282773	≤15100
VI-7000	70(100)	1050-1310	180-350	264-400	530027282863	≤17090
VI-8000	70(100)	1330-1670	250-380	320-440	550025653178	≤18495
VI-8000 (II)	80(150)	940-1170	320-600	440-630	600030223425	≤24610
VI-9000	100(150)	880-1100	400-1000	630-740	620033003890	≤33100

Product Features:

1. Simple structure, easy to set up and repair, low cost in operation;

2. High crushed rate,energy saving.

3. High production of crushing, has the function of fine crushing and rough grinding;

4. It is little affected by the moisture content of materials, and the content can reach about 8%.

5. It is suitable to crush medium hard and ultra-hard materials.

6. Excellent shape of product, the product shape is mainly cubic with small fraction of elongated flaky particle shape, suitable for aggregate shaping, manufactured sand.

7. The liner abrasion of impeller is small, easy to maintain.

8. Working noise is lower than 75 decibel.

Working Principle:

Material falls down into high rolling impeller cavity vertically through the upper part of machine. Under great centrifugal force, it hits and crushes another part of material that distributing around the impeller with umbrella form. After hitting each other, they force a vortex between impeller and shell, and hit each other several times; finally smaller stone comes out, and goes to vibrating screen. Satisfactory material is transported by conveyor belt. However overlarge material will go back to VI Series Vertical Shaft Impact Crushers to be re-crushed. Otherwise, output sizes can be also adjusted according to customer's requirement.

Mining equipment we can provide:

Customer visit:

Welcome to contact and visit us.