Product Introduce of hammer crusher:

PC Series Hammer Crusher can be used to break the brittle material whose compression strength is less than 150Mpa and the surface water content is lower than 2%. It is used in large, medium and small size of mining, construction material, road, silicate and chemistry crushing. It has the feature of simple structure, easy to operate and maintenance, high crushing ratio,less over-crushed, the size of the finished goods are even and small, high capacity and low energy consumption etc. 

Advantage of hammer crusher:

1)There are maintenance hole in front and back of the machine to make it easy to repair, adjust and change 

parts.

2) There are repair hole on both sides of the machine for changing the hammer easily. 

3) There are several round plate installed on the main shaft. 

Working Principle hammer crusher:

The main wroking part of hammer crusher is rotor with hammer, the rotors consist of main shaft, disk, pin shaft and hammers.The motor drives the rotor to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by high-speed hammer. There is a screening palte under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until they reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirements.

Technical Data of hammer crusher :

Hammer crusher machine body is in Standard containers,or in bulks,  motors and small parts are packed in wooden cases.

Payment Term:

1. T/T and LC is usually used.

2. 30% T/T in advanced, and balance to be paid before delivery.

3. Take pictures or video in process and finish product before delivery to approval. 

Transportation: 

1. Export Port is Qingdao, Tianjin or Shanghai BY SEA.

2. If no request appoint port, we usally export from Qingdao Port. 

3. Trade Term is usally based on FOB, C&F, CIF. 

4. Shipping Advice will be provided for each shipment.  

(1)Guide our customers to deploy the most useful equipment item according to their requirement.

(2)Provide technical date, including machines list, base specification and installation picture.

(3)Design and manufacture product according to the clients' special request.

(4)Dispatch the engineer to site,design the best installation flow and scheme to customers for free.

To give you a responsible quotation, you can inform us the following information:

1).  What's the material you are going to deal with?

2).  What's the granularity of the material?

3).  What's the granularity of the final products are you going to achive?

4).  What's the producing capacity you are going to achieve?

Our engineers will suggest you the most suitable one for you according to your information.