HPB59-1/JIS C3710/ASTM C37000/DIN CUZN40PB2 Lead Brass Standard  GB/T 4423-2007

we have our own cooperative copper factory,mainly do aluminum bronze and brass,both have sheet,bar,pipe and wire

Specifications

The biggest characteristic of copper is highly conductive, thermal conductivity, and good corrosion resistance.However, the strength of the industry of pure copper is not high (about 200 mpa), which limit the use of it as a structural material.In order to improve the strength of the copper, and give special performance, people just the right amount of alloying elements are added into the copper, so copper alloy, high strength, toughness, wear resistance and good conductive, thermal conductivity, especially
Corrosion resistance in the air.Therefore, has been widely used

Main Brass,

Chemical Composition

Our Main Products

Bronze 

1 chromium bronze QCR0.5  QCR0.5-0.2-0.1   QCR0.6-0.4-0.05

2  phosphor bronze PB1  PB2

3  packfong C2112C2111   C2113

4   silicon bronze QSI3-1  QSI 1-3  QSN3.5-3-1.5

5   manganese bronze  QMN1.5    QMN2 QMN5

6  lead bronze  ZCuPb10Sn10    ZCuPb15Sn8     ZCuPb20Sn5    ZCuPb17Sn4Zn4

7 aluminum bronze QAL9-4   QAL9-2  QAL9-4-4-2  QAL10-3-2  QAL25-6-6-6   QAL10-4-4   QAL10-5-5   QAL11-6-6

8 tin bronze  QSn4-3,QSn6.5-0.1,QSn7-0.2,QSn6.5-0.4, QSn1.5-0.2  , QSn4-4-4  QSn7-0.2  QSn8-0.3  , ZQSn6-6-3 , ZCuSn5Pb5Zn5, ZCuSn10Pb1, ZCuSn10Pb2 ,3-8-6-1 , 3-11-4

brass

1  iron aluminium brass 35-2-2-1  38-2-2

2 aluminum brass HAL66-6-3-2,HAL61-4-3-2,HAL60-1-1,HAL59-3-2

3 brass H90,H62,H68,H85,H70,H65

4 lead brass HPB63-3,HPB63-0.1,HPB62-0.8,HPB62-2,HPB60-2,HPB59-3,HPB59-1

certificates

process of produce

some of our products