Automatic PET Bottle Soft Drink Making Machine

1. The PET bottle soft drink making machine adopts the negative pressure filling which we specifically design for filling,it ensures minimal loss of CO2 from the product
2. The automatic bottle soft drink making machine is advanced, pithy and rational and the driving and up down transmission is located between the stainless steel working plat and the bracket and their waterproof is good, sanitary and credible and adjusting and maintaining are very easy.
3. We design the filling valves on basis of foreign advanced technique for adapting high-speed hot filling. It can ensure the valves open and close flexibly because of using guide sheath.Adopting easy-fixed configuration, the valve is easy to cleaning promptly and has automatic cleaning function.
4. The filling operation of bottle soft drink making machine is faster and more stable because the new type micro pressure filling system is adopted

Washer of Soft Drink Making Machine

The bottle is blew into the bottle shifting wheel, when the flushing clamp reaches the bottle neck, the jaw will clamp the bottleneck, under the guidance of the rail, the clamp will turn the bottle 180°into an upright position, through second bottle pusher into the filling position.

Filler of Soft Drink Making Machine

The filling part is manly composed of a filling valve and filling transmission parts. The washed bottle reaches the filling position via the bottle shifting wheel. In the mean time, the bottle clamping plate of the filling machine will clamp the bottle and move up to seal the bottle, filling valve will open, send the liquid into the bottle. When the liquid level of the bottle reaches the trachea of the filling valve, the filling will stop. 

Capper of Soft Drink Making Machine

The capping part consists of screw heads, capping transmission part, a sorting part and an under cover tube parts. The bottle which has finished filling will enter the capping position via the driving wheel. The photoelectric detection of the detecting signal detects the bottle, send a message to the valve cover, the cylinder cap will open, the caps will be blew into the cover plate by compressed air.

Bottle Design Service

Our engineer can design different bottle drawing for your reference!
Contact Us: We will send design drawing! 

Layout Design Service

We supply standard layout for each water filling machine line,
also available for customize design layout based on Customers Factory Area!
Give US: Factory Area 

Label Design Service

Design colorful label for customers choice
Provide Us: Information want to put on label