Automatic Drink With Gas Filling Machine

1. Our gas filling machine adopts the negative pressure filling which we specifically design for CSD filling, it ensures
minimal loss of CO2 from the product
2. The configuration of filler is advanced, pithy and rational and the driving and up-down transmission
is located between the stainless steel working plat and the bracket and their waterproof is good,
sanitary and credible and adjusting and maintaining are very easy.
3. We design the filling valves on basis of foreign advanced technique for adapting high-speed hot
filling. It can ensure the valves open and close flexibly because of using guide sheath. Adopting
easy-fixed configuration, the valve is easy to cleaning promptly and has automatic cleaning function.
4. The filling operation is faster and more stable because the new type micro pressure filling system
is adopted.
5. The electropneumatic filling valves are equipped with interchangeable level tubes to make the
best precision filling, and the filling level for the bottle is adjust.

Washer of Gas Filling Machine

The bottle is blew into the bottle shifting wheel, when the flushing clamp reaches the bottle neck, the jaw will clamp the bottleneck, under the guidance of the rail, the clamp will turn the bottle 180°into an upright position, through second bottle pusher into the filling position.

Filler of Gas Filling Machine 

The filling part is manly composed of a filling valve and filling transmission parts. The washed bottle reaches the filling position via the bottle shifting wheel. In the mean time, the bottle clamping plate of the filling machine will clamp the bottle and move up to seal the bottle, filling valve will open, send the liquid into the bottle. When the liquid level of the bottle reaches the trachea of the filling valve, the filling will stop. 

Capper of Gas Filling Machine

The capping part consists of screw heads, capping transmission part, a sorting part and an under cover tube parts. The bottle which has finished filling will enter the capping position via the driving wheel. The photoelectric detection of the detecting signal detects the bottle, send a message to the valve cover, the cylinder cap will open, the caps will be blew into the cover plate by compressed air.

Before Sales

1.Anser your any question on us within 24 hours.
2.Supply all information you required.
3.Machines video for reference
4.Welcome to visit factory

On Sales

1.Update production progress each week
2.Sending machines pictures on production
3.Machines testing running over 8 hours, and sending testing videos

After Sales

arranged to install machines
2.Sapre Parts proviced
3.After sales hotline: 0086-512-58550068