Specifications
This product is a new type of high-strength ceramic tile adhesive, applying to all kinds of ceramic tile, stone plate paste.Co
Geerda Environmental Tile Adhesive
Product Description
The tile adhesive is developed according to the test center with spinning , high-quality synthetic resin and special additives , gray or white adhesive cement
Feature
1. This product is a new type of high-strength ceramic tile adhesive, applying to all kinds of ceramic tile, stone plate paste.
2. Convenient and efficient.
3. Excellent adhesion and can save a lot of material.
4. Environment-friendly, good impermeability and antiaging properties.
5. Can be applied to rough or smooth cement-based surface.
Construction Instructio
1. Construction surface: must be dry enough without any loose material, grease and lacquer wax, ect.
2. Gypsum base or anhydrite surface: completely dry and hard enough without any dust.
3. Cement base: No shrinkage after laying ceramic.
Indication
Project | Index |
Proportion | 1.45G/CM3 |
PH | 13 |
Construction of the temperature | 5.C~40.C |
Opening Hours | about 20min |
Tune sewing time | about 45min |
Rub slit time | WALL after 4-8 hours FLOOR after 24hours |
Can withstand the load of the People's Bank | after 24 hours |
Health of | 14 days |
|
|
Attention
1. Can not be used on the base of woodiness, metal, rubber,PVC and varnished cloth
2. Can not be used on drywalling
3. Can not be used on non hydros opacity ceramic tile, such as clinker tile
Scope of Application
1. Indoor and outdoor walls, or ceiling tiles and mosaic.
2. Fixed-point bonding with insulation, sound insulation material, such as expanded polystyrene, expanded polyurethane, fiberglass or wood wool cement board additives.
