Low headroom electric hoist for single girder overhead crane
USD $500 - $5,000 /Set
Min.Order:1 Set
Henan Olat Crane Machinery Equipment Co., Ltd.
Low headroom electric hoist for single girder overhead crane
-----------------Best Solutions Ready For Installation To Meet Individual Requirements
Hoist general
Lifting capacity : 2t-20t
European optimized design, light dead weight
Silent operation
Low hoist frame reduces the height of building and saves construction cost
Modern integration design which combine motor together with fan, reducer, rope drum and brake, compact structure
Optimum cooling with good cooling performance, cooling is improved up by 30%, resistant to a temperature rise of 170 ° C
Ambient temperature: -10℃ – +40℃
Epoxy zinc-rich painting for one bottoms and two sides of 120μm thick, to achieve a long lifespan, beautiful appearance and good luster
Lifting motor
Asynchronous squirrel cage motor (Synchronous speed reaches up to 3000rpm)
Two-speed pole changing or frequency conversion for stepless speed control
Heavy duty, cyclic duration: 60% ED
Protection class: IP54, Insulation class: F
Lifting Reducer
Aluminum shell, light dead weight and good sealing condition
Semi-fluid grease lubrication, life cycle design, maintenance free
Helical gear with hard tooth face
Lifting brake
DC Electromagnetic disc brake
Self-adjusting brake pad, self-compensation wear, alarm when the brake pad is not thick enough
Excellent integration design of the regular closed brake and motor with good synchronization. Safe braking torque (at least 1.8 times) can effectively prevent the hook from slipping.
Fully covered, dust proof
Heavy duty
Large Frictional contact area, adjustable brake torque
Asbestos-free and environmentally friendly friction piece
Brake lining life: not less than 1 million times under normal use, emergency braking is not lower than 500 times
Rope Drum
Large diameter rope drum, Diameter(rope drum)/ Diameter(Steel wire rope) =46, to extend the rope's lifetime
Ensures accurate load positioning, hook drift +/- 4mm per meter
At least two rings of rope are around the drum while the hook is at the lowest position
Rope guide is made of spheroidal graphite cast iron, with wear resistant and heavy-duty
A spring operated guide roll in the rope guide to prevent the steel wire rope from going out of the groove effectively
Steel Wire Rope
High tensile steel wire rope, breaking force can reach to 2160N/mm2
Galvanized steel wire rope, maintenance free
Hook
DIN 17200 standard Hook, quenched and tempered steel 34CrMoV
Anti-friction bearings with life cycle lubrication, 360°rotation
Safety lock is to prevent the hook from releasing
Protection Function
Overload protection: The hook will go down and be forbidden to go up to ensure the load to fall to the ground safely when the overload occurs.
Lifting limit switch: 4-step adjustable geared rotating limit switches, automatic resetting, slow down before stopping, accurate phase sequence control
Mechanical anti-collision device: rubber buffer block, efficient energy absorption
Wireless anti-collision limit switch: Infrared induction limit, sensitive and reliable
Overheating protection: Equipped with thermistor, the lifting motor has a good protection function from overheating
Braking safety protection: electric braking + mechanical brake