The small and light type Cantilever Crane/jib crane with Electric Hoist or chain hoist
USD $500 - $50,000 /Set
Min.Order:1 Set
Henan Olat Crane Machinery Equipment Co., Ltd.
The small and light type Cantilever Crane/jib crane with Electric Hoist or chain hoist
We can also supply the main crane components and full manufacturing drawings and full technical support, and your side manufacturing the beam structure in your country, that will save your sea freight and transportation cost.
-----------------Best Solutions Ready For Installation To Meet Individual Requirements
Design international standard: DIN (Germany), FEM (Europe), ISO (International)
BZ BZD Model Floor mounted jib crane
Capacity:0.2t,0.5t,1t,2t,3t,10t,20t
Lifting height and working radius is according to your demand
Rotation degree:360degree.
Lifting mechanism:chain hoist or wire rope electric hoist
Note:
Floor mounted jib crane is a kind of small and medium-sized lifting equipment with the recent development.Its unique structure, safe and reliable.With high efficiency, energy conservation, the provincial time, effort, and flexible and so on. And it can operate freely in 3D space,and it can show its superiority more especially when its working in the short-range and intensive lifting occasions.Widely used in workshops, warehouses, docks and other fixed place.
1. Limit Switch: Safety limit switches for stoppers prevent over traveling in all motions.
2. Weight overload protection device
Includes automatic stopping type lifting weight limiter and weight display device.
3. Lifting limit switch and traveling limit switch
4. Emergency stop system
5. Electrical protection
The main insulation switch, emergency stop switch, short circuit, Zero voltage protection, loss of field protection, Current overload protection, over speed protection, zero position protection
Phase sequence protection and adopted crane specially anti- vibration contactor etc.
6. Interlock device
It sets interlock device for the cabin door and the other door from cabin into bridge structure, when the door is opened, the crane cannot work.
Model | BZ0.25 | BZ0.5 | BZ1 | BZ2 | BZ3 | BZD5 | ||
Capacity | Ton | 0.25 | 0.5 | 1 | 2 | 3 | 5 | |
Lift height | m | According to your demand | ||||||
Max. radius of gyration | m | According to your demand | ||||||
Turning angle | degree | 360 degree | ||||||
Lifting speed | Normal | m/min | 4;10;8 | 5;10;8 | 5;8 | 4;8 | 8 | 8 |
Slow | m/min | 1;2.5;0.8 | 1.25;2.5 | 1.25;2;0.8 | 1;0.8 | 0.8 | 0.8 | |
Travel speed | m/min | 20 | 20 | 20 | 20 | 20 | 20 | |
Angle of revolution speed | m/min | 1.0 | 0.8 | 0.7 | 0.7 | 0.9 | 0.6 |
Normal Quotations:
1. Lifting capacity ______ton
2. Standard type or any special design demand on crane?
3. Crane Arm length _______meters
4. Lifting height ______meters (Hook to ground)
5. Industrial voltage _____V, _____HZ, 3Phases
6. Control mode
A. Pendant control B. Remote control
7. What material does the crane lift?