QZ Model 5~20ton Double Girder Grab Bucket Bridge Crane
USD $500 - $50,000 /Set
Min.Order:1 Set
Henan Olat Crane Machinery Equipment Co., Ltd.
5~20ton Double Girder Grab Bucket Bridge Crane
We can also supply the main crane components and full manufacturing drawings and full technical support, and your side manufacturing the beam structure in your country, that will save your sea freight and transportation cost.
-----------------Best Solutions Ready For Installation To Meet Individual Requirements
Design international standard: DIN (Germany), FEM (Europe), ISO (International)
Application:
QZ Model Double Girder Grab Bucket Bridge Crane is widely used to transport, load and unload incompact or bulk materials in mine, port, factory, workshop, warehouses, goods yard,etc.
QZ type double girder grab bucket crane is composed of strong boxed bridge, traveling mechanism, trolley, electric equipment and grab, it is a heavy duty type overhead crane that can meets high working frequency using. Grab's open direction is divided into parallel and vertical with the main beam.
Grab Info:
The lifting capacity includes the weight of the grab.
According to different work duty and materials, The grab could be double or four wire rope, hydraulic type or mechanical or electric type.
1. Limit Switch: Safety limit switches for stoppers prevent over traveling in all motions.
2. Anti collision device
When two crane traveling on the same rail, the cranes will install the following devices:
Anti-collision device, Infrared non-contact and inductive type limit device
Sound and light alarm device, Wireless anti-collision device
3. Weight overload protection device
Includes automatic stopping type lifting weight limiter and weight display device.
4. Lifting limit switch and traveling limit switch
5. Emergency stop system
6. Electrical protection
The main insulation switch, emergency stop switch, short circuit, Zero voltage protection, loss of field protection, Current overload protection, over speed protection, zero position protection
Phase sequence protection and adopted crane specially anti- vibration contactor etc.
7. Interlock device
It sets interlock device for the cabin door and the other door from cabin into bridge structure, when the door is opened, the crane cannot work.
Lifting Capacity | T | 5t | 10t | 16t | 20t | |
Note: the lifting capacity includes the dead weight of grab. | ||||||
Span | m | 10.5-31.5m | ||||
Speed | Lifting | m/min | 40.1 | 40.7 | 41.8 | 48.6 |
Traveling of Trolley | 44.6 | 45.6 | 43.2 | |||
Traveling of Crane | 93.7/86.4 | 76/89 | 89/87.3 | 87.3 | ||
Operational Model | Cabin(open and closed), remote control | |||||
Working Duty | A6 | |||||
Power Supply | By your country voltage |
Normal Quotations:
1. Lifting capacity ______ton
2. Single beam or double beam?
3. Standard type or Europe type?
4. Crane Span _______meters (Rail middle center to center distance)
5. Lifting height ______meters (Hook to ground)
6. Industrial voltage _____V, _____HZ, 3Phases
7. Control mode
A. Pendant control B. Remote control C. Cabin control
8. What material does the crane lift?
9. Do you also need us to supply bearing beam, rail and slide wire?
A. Yes B. No
10. Any special design demand on crane?