Top Sales vehicle start+Flashlight+SOS 12000mah multi-function auto emergency start power

Product Decription

Top 10 features

1. Car jump start 23 times. Peak current can reach 400A.
2. Reverse charge protection
3. Extreme cold weather (-20°C) Jump starter
4. Full change Iphone 7 times
5. Laptop power supply 2h
6. 12V car electronic products (i.e. car refrigerator) power supply
7. Illumination 24h
8. Warming flashing, SOS signal 40h
9. Weight and size is only 1/10 of traditional lead-acid jump starter
10. More than 3 years lifetime

Specification 

 Advantages 

1.The smallest and lightest portable multi-function jump starter with patented

technology in the current market.

2.Use 12000mAh high capacity and high power battery. Support fast charging, low self- discharge,cycles can reach 1500times.

3.Support 12V vehicle start, and charge for various mobile phone. PSP, MP3/MP4,

PDA,notebook, car refrigerator and so on.

4.Flashlight function. Support 3 kind lighting modes (light, strobe, SOS )

5.Multiple safety protection design ensure jump starter zero defect.        

 Special note:

1.To start 12V cars, please make sure at least THREE LED lights of EPOWER are bright .

2.Connect the red battery clip to the battery positive (+) and black clip to the battery 

negative (-) and insert the plug into e-power.

3.Turn the ignition switch to start position.

4.Once the car is started, disconnect the plug and remove the battery clips within 30s.

 Multi-function car jump starter power bank 

Instruction steps for car jump starter

1.Select the appropriate voltage and connector for the electronic device to charge/power supply .

2.Press the switch to start charging when your device connected with Epower, if you unplug

 the cable, auto-sleep will start in one minute .

3.Five lights will flash circularly during the charging by Epower and all lights will keep bright

 when your device is full-charged.
 

4.During the charging for your device, LED lights indicate the balance power of built-in

battery of Epower,Four lights indicate 80% balance, three lights indicate 60% balance,

 two lights indicate 40% balance and one light indicates 20% balance. The built-in battery

 is empty when all LED lights start to flash.

5.Press the switch five seconds to start if you want to use LED for illumination and select

 the status (light, strobe, SOS and close) by pressing the switch to transform.

6.Store the product in a cool and dry place and away direct sunlight.

Part List

Application

Mobile Phone, PSP, MP3/MP4/MP5, Camera, Pocket PC, PDA, 

Ipad, Laptop, LED Light,burst flashing, SOS