Specifications

1.Extracting gold in one-off
2.High recovery rate
3.Hot sale in about 40 countries
4. long service life , best services

2014 tungsten ore shaking table with best after-sale services 

 

 

1. Application of Mineral Processing Shaking Table

    Mineral processing shaking tables are designed to wet gravity-based separation of gold ore and other granular materials. There are many applications where the Mineral processing shaking table is of particular value and cannot be equaled for economical and efficient performance. They are effective in processing precious and base metal, rare metal and non-metallic minerals.   

 

2.  Working Principles of Mineral Processing Shaking Table

    The table dressing process carries on the complex inclined bed surface, and the ore grains are sent in ore trough from the bed surface. it supplies crosswise washing for the water trough, thus the ore grains laminate surface and according to the proportion and granularity, make the longitudinal motion and transversal motion along the bed surface. in the function of the gravity, the crosswise running water momentum, and the inertia and friction force from the reciprocating motion asymmetry of bed surface. Therefore, the ore grains of different proportion and granularity fan-shaped flows off along respective movement direction. Separately discharged from the ore concentrate end and the debris side different area, finally divided into the ore concentrate, the middling and the debris.  

 

3. Working Process of the Mineral Processing Shaking Table

    The manganese, gold shaking table is shaken back and forth longitudinally, using a slow forward stroke and a rapid return strike that causes particles to raw along the deck parallel to the direction of motion. The lighter materials move up and over the riffles and down to exit on the tailings side of the table. Wash water is fed at the top of the table at right angles to the direction of table movement. These forces combine to move particles diagonally across the deck from the feed end and they separate out on the table according to size and density. Tables are most commonly used to recover gold from hard rock ores, but can also be used to recover other mineral materials of higher than normal density. They do an excellent job of recovering small gold particles, even with a fairly high feed rate.   copper separation shaking table

 

4. Structure of the Mineral Processing Shaking Table

    1). Head of shaking table: This is eccentric connecting-rod type mechanism. The motor drives the eccentric shafts to rotate and the connecting rod to move up and down. When the connecting rod pushes down the toggle plate compression spring, the pull rod drives the table surface to move in the direction of table head. When the connecting rod pushes it upward, it, through the spring tension, drives the table surface to move in the opposite direction. When they are linked, the rotating motion of eccentric shaft is changed into horizontal alternating differential motion of table surface.    copper separation shaking table 

    2). Shaker table for gold table surface: It is mainly composed of vibrating roof, steel skeleton, glass fiber reinforced plastics and wear-proof surface, feed water tank, feed chute, and draw bar. The table surface adopts steel skeleton FRP composite structure. That is, glass fiber reinforced plastics are pasted on steel skeleton to form a solid glass fiber reinforced plastic surface. Its above uses abrasion-proof materials to make surface and riffle (notch groove). 

    3). Bearing and Adjusting Gradient Mechanism: Shaking table for gold, the bearing and adjusting gradient mechanism is mainly composed of shaking support plate, adjusting seat board, saddle seat, and adjusting screw rod. The shaking support plate enables the table surface to make arc forward and backward alternating movement on vertical plane. The shaking support plate and shaking box are fixed on the adjusting seat board with gripping channel steel. When hand wheel regulating screw rod is used to get the adjusting seat board to rotate on the saddle seat, the Transverse gradient of table surface can be adjusted.

 

5. Feathers of Mineral Processing Shaking Table

     1) Big steel intensity. 

    2) Low water-absorptivity, does not increase height
    3) Good wearability of the work surface.
    4) Anti-chemical corrosion, acid do not avoid medicament in ore polp.

    5) Good weather resistenance,good shape stablity;

    6) Good selection function,good index stability.

 

6. Technical Parameters of the Mineral Processing Shaking Table

 

Name		bed surface for coarse sand	bed surface for fine sand	bed surface for slurry
Bed dimension	Length (mm)	4450	4450	4450
	transmission  end width (mm)	1855	1855	1855
	concentrate ore width (mm)	1546	1546	1546
Max Feeding Size (mm)		2	0.5	0.15
Feeding volume   (t/h)		30-60	10-20	15-25
Feeding density        (%)		25-30	20-25	15-25
stroke (mm)		16-22	11-16	8-16
Frequency ( t/s)		45-48	48-53	50-57
Cross Slope of Surface		2.5°-4.5°	1.5°-3.5°	1°-2°
mineral dressing area(m2)		7.6	7.6	7.6
Shape of bed surface		Rectangle	indention	Triangle
Motor Power     (KW)		1.1	1.1	1.1
Driving type		Eccentric link structure

 

This parameter is just for the reference, if there are any specific requirements, you can contact Lorraine for the most suitable information and quotation.

 

7. For the specific quotation, please confirm the following specifications

    1). What’s the material you are going to deal with?

    2). What’s the feed size,feeding volume,and feeding density?

    3). What’s the final products are you going to achive?

    4). What’s the mineral dressing area?

 

 

Shaking table is one of the mineral separation equipment of gracity concentrator.It is easy to be operated and can produce high grade concentrated ore,secondary concentrated ore,middlings and gangue,ect at the same time.It is widely used to separate tungsten,stannum,niobium,other rara metal and noble metal ores;It can also be used to separator iron,manganese minerals,coal,etc.    copper separation shaking table

 

 

We have various of shaking table, such as Coarse ore surface of bed , Granulated sugar surface of bed , Ore slime surface of bed etc.   copper separation shaking table

 

 

6-S shaking table has the feature of high grade ore, high efficiency, and easy in charge and adjustable. They can keep the balance when changing the landscape orientation gradient and stroke, the springs are in the box with closed frame, and educe the high grade ore and gangue one-off. 

 

 

We design different production lines ranging 50 t/h to 500 t/h by combining different models of equipments.It is widely used for crushing hard limestone, granite, basalt, gravel, metallurgic slag, etc or artificial sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customers' demands according to different craft requirements.   

XBM is the professional manufacturer of the beneficiation machines, we supply both thw plants and the specific machines of the mining machines like shaking table, crushing machine, ball mills, spiral classifiers, flotation machines, etc. For more information and quotation of the shaking table and mining machines.