two post portable garage for two car parking
USD $1,500 - $2,000 /Unit
Min.Order:1 Unit
Qingdao Telian Machinery Co., Ltd.
Common faults and maintenance methods:
Questions | Reasons
| Solutions |
The platform doesn’t rise ,Motor turns, no leakage of hydraulic oil |
Air in the hydraulic oil | Non-load lifting to the apex ,need keeping some seconds then falling, stopped when falling to the middle, opened the oil connection to exhaust, then tighten. |
Low temperature made the hydraulic oil thickened | Anew replenish hydraulic oil | |
Overloaded | Check and confirm the lifting weight is less than the rated load | |
Leakage hydraulic oil in the place of tubing joint | Joint loose | Screw down |
Joint was broken | Replace joint | |
Leakage hydraulic oil | Oil cylinder sealing ring was wear | Replace the oil cylinder and sealing ring |
Motor do not turn
| Motor burn out | Check and replace the motor |
The voltage is too low | Check and confirm the voltage for voltage regulation | |
The fuse is bad | Replace fuse | |
| Limit switch is broken | Replace limit switch |
Platform is not falling | Platform in the lock state | Control the platform rise and unlock, then control it falling |
| The hydraulic oil is too thick | Replace hydraulic oil |
Tilting Parking Lift
Production Description:
This parking system is designed of two spaces of up and down as one unit. The bottom car can go in and out directly. When the upper space needs to park a car, the car in the bottom should be driven out;
Hydraulic drive, chain balancing device to ensure the balance both ends of rise and fall’;
Low noise, smooth operation, save energy, low carbon and environmental protection;
Vehicle loading pallet fully enclosed design, to avoid oil leakage, rain and snow
Polluting the lower vehicles;
Electrical and driving parts with waterproof characteristics;
Simple structure, easy installation, minimal requirements for civil engineering;
It can be widely used in apartments, yards and lower height of basements.
Specifications:
Name | Tilting Parking Lift |
Model | PTJ 301 |
Dimension | 3700*2500*1960mm |
Weight of parking car | ≤2t |
Rated speed | 2.2m/min |
Motor | 2.2kw |
Warming devices | Yes |
Mode of operate | Button |
Mode of control | Hydraulic control |
Mode of drive | Hydraulic driving, chain balance |
Electrics | 380v,3 phase; 220v single phase |