Product Details

Specifications

1.Low noise
2. smooth operation
3.save energy
4.low carbon and environmental protection

FAQ

Common faults and maintenance methods:

Questions	Reasons	Solutions
The platform doesn’t rise ,Motor turns, no leakage of hydraulic oil	Air in the hydraulic oil	Non-load lifting to the apex ,need keeping some seconds then falling, stopped when falling to the middle, opened the oil connection to exhaust, then tighten.
	Low temperature made the hydraulic oil thickened	Anew replenish hydraulic oil
	Overloaded	Check and confirm the lifting weight is less than the rated load
Leakage hydraulic oil in the place of tubing joint	Joint loose	Screw down
Leakage hydraulic oil in the place of tubing joint	Joint was broken	Replace joint
Leakage hydraulic oil	Oil cylinder sealing ring was wear	Replace the oil cylinder and sealing ring
Motor do not turn	Motor burn out	Check and replace the motor
	The voltage is too low	Check and confirm the voltage for voltage regulation
	The fuse is bad	Replace fuse
	Limit switch is broken	Replace limit switch
Platform is not falling	Platform in the lock state	Control the platform rise and unlock, then control it falling
	The hydraulic oil is too thick	Replace hydraulic oil

Company Information

Product Description

Tilting Parking Lift

Drawing:

Production Description:

This parking system is designed of two spaces of up and down as one unit. The bottom car can go in and out directly. When the upper space needs to park a car, the car in the bottom should be driven out;

Hydraulic drive, chain balancing device to ensure the balance both ends of rise and fall’;

Low noise, smooth operation, save energy, low carbon and environmental protection;

Vehicle loading pallet fully enclosed design, to avoid oil leakage, rain and snow

Polluting the lower vehicles;

Electrical and driving parts with waterproof characteristics;

Simple structure, easy installation, minimal requirements for civil engineering;

It can be widely used in apartments, yards and lower height of basements.

Specifications:

Name	Tilting Parking Lift
Model	PTJ 301
Dimension	370025001960mm
Weight of parking car	≤2t
Rated speed	2.2m/min
Motor	2.2kw
Warming devices	Yes
Mode of operate	Button
Mode of control	Hydraulic control
Mode of drive	Hydraulic driving, chain balance
Electrics	380v,3 phase; 220v single phase

Packaging & Shipping