Specifications

1.OBD2 diagnostic
2.Web/Smart phone app platform,SMS query
3.OTA upgrade
4.Built-in acceleration sensor
5.Plug and play

 OBD diagnostic interface usb, Accuracy Fuel Management, OBD ii GPS Tracker

 

GOT10 OBD GPS Tracker has a very wide range of industrial and commercial applications, OBD interface, OBD diagnostic, plug and play,Voltage detection ACC, can be trackered on the platfrom through computer & smart phone.

Typical application areas : logistics enterprises, fleet management, bus management, insurance , power , oil , telecommunications , taxi , car sales , car rental , vehicle maintenance , technology researchers, no need to wiring, especially for private car.

 

 

Product Feature
 
*Supports quad bands,I.e. 850/900/1800/1900MHz,worldwide used
*Plug and play, Easy to install and just connects OBD interface to work.
*GPS precise positioning with A-GPS and uploaded by GPRS regularly 
*Tracks real-time and playback
*Cloud storage OBD data , Vehicle speed, Coolant temperature, fuel consumption and *other standard OBD2 diagnostic data, support read mileage, remaining oil. by some cars' module.
*Web browser platform, Smart phone APP platform and SMS query.
*Supports multiple alarm, Built-in acceleration sensor with vibration, collision and falling alarm.
*Built-in battery and unplugging alarm
*OTA upgrade program.

 

 

Cars Diagnostic System record function

 

Engine speed: RPM  Accurate to 1RPM

Intake air pressure: MAP  √

Caused by air temperature: CIA  Accurate to 1 ° C

Launch from the load: LOD √

Throttle position: TPS √

Fuel pressure: FRP √

Ignition timing: ING Accurate to 0.1V

Battery voltage: VLT  Accurate to 1 ° C

Fuel System Status: LP √

Water temperature: CWT Accurate to 1 ° C

Speed: KPH Accurate to 1KM/hr

 

 

Specifications  

 

· GSM frequency : Quad-band 850/900/1800/1900 MHz

· Size :  66*48*25mm 
· Weight:  55g 
· Interface: OBD interface
· Data transmission: GPRS/SMS
· Positioning mode: GPS/AGPS
· Working voltage: 9-36V DC
· Internal battery: 3.7V/100mA Lithium battery

· Install: OBD II connector/Plug-in and play 
· GPS channels: 50
· Sensitivity: -160dBm
· Positioning Accuracy : 10m 
· Cold start: <32s
· Hot start : < 1s

· Protocol: TCP/IP
· Built-in GPS/GSM antennas
· Working temperature :   -30 °C~ +70°C 
· Storage temperature: -40 °C~ +85°C

· Humidity: 5%~95%

· Communication protocol:SMS, GPRS, TCP/UDP, USSD, FTP

· Normal currency:<100mA, 13.8VDC
. Max. currency:<150mA, 13.8VDC
. Sleep mode currency:<10mA,12VDC

 

 

 How to find your OBDII Connector

Start by looking around the underside of your dashboard, below your steering wheel but above your gas and brake pedals. The diagram below will show you the general area to search.

 

   

The connector may be covered by a small flap, but will usually be visible without requiring any disassembly. Once you believe you have located the OBDII connector, compare it to the picture below.

 

Installing the OBDII-GPS

Once the OBDII connector has been located, all that is required is to plug the OBDII-GPS into the connector. Once you turn the ignition of the vehicle on, the small lights on the unit will blink. During your first installation, you will need to give the OBDII-GPS unit a minimum of 15 minutes fully initialize.

 

 

GPS Tracking Diagnostics System

 

 

 

 

 

Detail picture

 

GPS Tracking System                                                                                                               

 

 

 

1) Geo-fence Alarm 

 

 

2)Add device with protocol you need

 

 

 

3)GPS tracking Statistics report

 

  Shenzhen Eelink is a manufacturer and exporter of GPS Trackers, OBD II GPS Tracker, OBD 2 Tracking, Car On-Board Diagnostics Tracking, Vehicle Tracking Devices, Personal Tracking device. We also offer mature GPS Tracking Solutions including vehicle tracking, personal security, and fleet management

 

Office and Laboratory

 

 

Factory SMT Workshop 

 

 

Factory Cable Assembly  Workshop 

 

 

 

Company Certificate

Focusing on products that are truly superior and innovative, Eelink has been awarded China National Hi-tech Enterprise and Software Enterpise, Certificate of Utility model Patent Certification, Eelink’s products have passed the international certification BV, SGS,D&B, Design Patent, CE, FCC, PAHs,CCC,etc.