Specifications

1.plug-and-play terminal
2.real-time position and speed
3.Geo-fencing and abnormal alarm
4.GPRS and SMS channel

Shenzhen Eelink is a manufacturer and exporter of GPS Trackers, Vehicle Tracking Devices, Personal Tracking device. We also offer mature GPS Tracking Solutions including vehicle tracking, personal security, and fleet management

 

This device plugs into a vehicle's OBDII port for ease of installation. An additional Y-cable allows you to place the device up under the dash for an even more covert option

 

1.Smart, lightweight, free installation, plug and play;
2.Widely applicable models: all vehicles follow the OBDII standard protocol;
3.Automatic data storage, data is not lost when power failure ;
4.Data saved locally for 500 hours, and supports remote storage; software updates, hardware set flexible;
5.Professional remote fault diagnosis;

 

 

How to find your OBDII Connector

Start by looking around the underside of your dashboard, below your steering wheel but above your gas and brake pedals. The diagram below will show you the general area to search.

 

The connector may be covered by a small flap, but will usually be visible without requiring any disassembly. Once you believe you have located the OBDII connector, compare it to the picture below.

 

Installing the OBDII-GPS

Once the OBDII connector has been located, all that is required is to plug the OBDII-GPS into the connector. Once you turn the ignition of the vehicle on, the small lights on the unit will blink. During your first installation, you will need to give the OBDII-GPS unit a minimum of 15 minutes fully initialize.

Application

DRIVERS - Receive location, route and vehicle condition assistance automatically, anytime and anywhere.
TECHNICIANS - Remote vehicle diagnostics protects equipment and drivers.
OPERATIONS - Use real-time visibility to run operations more efficiently and safely.
DISPATCHERS - Plan and adjust routes more effectively and immediately.
SERVICE MANAGERS - Answer location inquiries faster and accurately.
RISK MANAGERS - Ensure regulatory compliance because unplanned incidents are reduced.
ACCOUNTANTS - Measure cost savings and increased customer satisfaction realized.
IT MANAGERS - Save valuable resources, with no demands on existing IT infrastructure or personnel.
EXECUTIVES - Increase value, through gains in productivity and utilization.

 

 

Cars Diagnostic System record function

1.Supports quad bands,
i.e. 850/900/1800/1900MHz,
universal in the world.

2.Easy to install, connect the OBD interface to work.

3.Supports single positioning and feedbacks position via GPRS at setting times.

4.Supports vehicle positioning and tracking.

5.Vehicle status and speed from OBD data is better than ACC.

6.Vehicle collision, falling alarm by SMS/Platform (optional).

Environment for use

1.Limited working temperature:-20°C~80°C

2.Storage temperature:-45°C~90°C

3.Humidity:<95%

4.Make sure the terminal is installed in OBD2 interface of the vehicle

 

Basic Specifications:

 

Working Voltage:	12VDC/24VDC
Standby Current	<3mA
Work current :	<120mA
GPS positioning accuracy	15M
GSM positioning accuracy	100M
GPS Frequency	1575MHz
GSM Frequency :	850/900/1800/1900MHz
Hot/warm/cold start time :	<3S,<1S,<60S
Dimensions (mm) L*W*H :	L*W*H:   56.5 X 47 X 24.6
Weight :	45 g

 

 

This device plugs into a vehicle's OBDII port for ease of installation. An additional Y-cable allows you to place the device up under the dash for an even more covert option