Specifications

four post car hoist , car jack lift, portable car lift
1.Hydraulic driven, cable lifter system
2.Manual or electric single poi

 

Questions	Reasons	Solutions
The platform doesn’t rise ,Motor turns, no leakage of hydraulic oil	Air in the hydraulic oil	Non-load lifting to the apex ,need keeping some seconds then falling, stopped when falling to the middle, opened the oil connection to exhaust, then tighten.
	Low temperature made the hydraulic oil thickened	Anew replenish hydraulic oil
	Overloaded	Check and confirm the lifting weight is less than the rated load
Leakage hydraulic oil in the place of tubing joint	Joint loose	Screw down
	Joint was broken	Replace joint
Leakage hydraulic oil	Oil cylinder sealing ring was wear	Replace the oil cylinder and sealing ring
Motor do not turn	Motor burn out	Check and replace the motor
	The voltage is too low	Check and confirm the voltage for voltage regulation
	The fuse is bad	Replace fuse
	Limit switch is broken	Replace limit switch
Platform is not falling	Platform in the lock state	Control the platform rise and unlock, then control it falling
	The hydraulic oil is too thick	Replace hydraulic oil

 

 

4 post parking car lift 

 

Technical parameters

 

Model No.	Lifting capacity	Lifting height	Width between posts	Width between runways	Rise/Drop time	Power
QTLP608	3200kgd/7000lbs	1800mm	1902mm	956mm	60/90s	2.2kw

 

 

Feature:

 

The best choice for parking and simple repair

Hydraulic driven, cable lifter system

Manual or electric single point release

Automatic lock system ensure safety at different heights

Maintenance free load bearing

Stop blocks in all posts for added safety

Moveable drips trays prevent pollution of vehicle on floor

Caster kit for moving the lift easily

Mold machining through the whole process so that the parts are universal and interchangeable

120% capacity dynamic load test and 150% capacity static load test

Italian oil seal to make sure no oil leakage

Solenoid valve with emergency manual drop function

Optional manual pomp for lock release in case of power off

Optional 24 control box and solenoid valve

 

 

Specifications:

 

Working noise:         ≤75dB(A)

Rise time:             60s

Drop time:             90s

Working temperature:   -5 °C ~ 40 °C

Motor power:           2.2kw / 220v, 380v

Relative humidity:       80%

Using altitude:         ≤ 1000m

Lifting capacity:         7,000lbs/3200kgs

Lifting height:           1755mm

Width between runways:   956mm

20 Container:             12 sets

40 Container:             24sets