Specifications

Hot Sale Short Head Cone Crusher For Sale:
1.good performance
2.high quality
3.large capacity
4.low consumption cost

    Hot Sale Short Head Cone Crusher For Sale

 

Overview of Rock Cone Crusher:

Cone crusher is suitable for crushing various kinds of ores and rocks with medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber and not damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the usage of the crushed ores. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

 
Working principle of Rock Cone Crusher:
The working parts are two cutter heads, also called cones; one is fixed cone ( also called outer cone), the other one is movable cone ( also called inner cone), please refer to the picture. The outer cone is fixed, which is one part of frame; the movable cone is plunged freely in the eccentric bush, so the central axis between the fixed cone and the movable cone intersects and forms into a bevel. When rotating, the movable cone rotates along the inner surface of the fixed cone. The place that the movable cone pressed against the fixed cone becomes the crushing cavity, where the materials is pressed, impacted and bent by the movable cone. The place that the movable moves away from the fixed cone becomes the discharging open, where the crushed materials is discharged out under the role of gravity, and the materials are sent from the feed open.

 

Characteristics of Rock Cone Crusher:
Movable cone rotates continuously, and the material crushing process and the unloading process works alternately along the work surface, which realizes the high output.
01- The materials are pressed, bent and sheared in the two cones, and can be easily crushed; lower power consumption
02- Even product granularity, cubic shape, the abrasion in the working surface of movable cones is even.
Structure introduction: cone crusher mainly consists of frame, horizontal shaft, movable cone, balance wheel, eccentric, upper crushing wall (fixed cone), under crushing wall (movable cone), Hydraulic coupling, lubrication system, hydraulic system, control system and so on.
03- Movable cone and fixed cone are being set. When movable cone swings, near the discharging open of the crushing chamber, there is parallel trough with equal gap between movable cone and fixed cone to make sure the final size even. Feed open is not big and only handles the materials after primary crushed.

This series cone crusher uses dry oil and water as two sealing ways, so that the dust will not enter into the inner of the machine, thus ensure the cleaning of the Run free oil, extend the life of plain bearings, thrust ball bearing , and make the machine running reliably. 

          

 

 

Specification of Rock Cone Crusher:

  

Model	Diameter  Breaking  Cone (mm)	Feed  Size (mm)	Range of  Discharge  Opening (mm)	Max. Feed  Size (mm)	Capacity (t/h)	Power (kw)	Weight (T)	Dimension (L*W*H)  (mm)
PYB600	600	75	12-25	65	40	30	5	2234*1370*1475
PYD600	600	40	2-13	35	12-23	30	5.5	2234*1370*1475
PYB900	900	135	15-50	115	50-90	55	11.2	2692*1640*2350
PYZ900	900	70	5-20	60	20-65	55	11.2	2692*1640*2350
PYD900	900	50	3-13	50	15-50	55	11.3	2692*1640*2350
PYB1200	1200	170	20-50	145	110-168	110	24.7	2790*1878*2844
PYZ1200	1200	115	8-25	100	42-135	110	25	2790*1878*2844
PYD1200	1200	60	3-15	50	18-105	110	25.3	2790*1878*2844
PYB1750	1700	250	25-50	215	280-480	160	50.3	3910*2894*3809
PYZ1750	1700	215	10-30	185	115-320	160	50.3	3910*2894*3809
PYD1750	1700	100	5-13	85	75-230	160	50.2	3910*2894*3809
PYB2200	2200	350	30-60	300	59-1000	280/ 260	80	4622*3302*4470
PYZ2200	2200	275	10-30	230	200-580	280/ 260	80	4622*3302*4470
PYD2200	2200	130	5-15	100	120-340	280/ 260	81.4	4622*302*4470

 

 

 

Note: This specification is just reference, any changes are subject to the products.

 

Order Online:

Note: If you're interested in the product, please submit your requirements and contacts and then we will contact you in two days. We promise that all your informations won't be leaked to anyone.