Mining Industry Widely Use Grinding Mill With Large Capacity  

Brief introduction

Cone crusher is suitable for crushing various kinds of ores and rocks with medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber and not damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the usage of the crushed ores. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

Working principle

The working parts are two cutter haeds, also called cones; one is fixed cone ( also called outer cone), the other one is movable cone ( also called inner cone), please refer to the picture. The outer cone is fixed, which is one part of frame; the movable cone is pluged freely in the eccentric bush, so the central axis between the fixed cone and the movable cone intersects and forms into a bevel. When rotating, the movable cone rotates along the inner suface of the fixed cone. The place that the movable cone pressed against the fixed cone becomes the crushing cavity, where the materials is pressed, impacted and bent by the movable cone. The place that the movable moves away from the fixed cone becomes the discharging open, where the crushed materials is discharged out under the role of gravity, and the materials are sent from the feed open.

Movable cone rotates continuously, and the material crushing process and the unloading process works alternately along the work surface, which realizes the high output. 

The materials are pressed, bent and sheared in the two cones, and can be easily crushed; lower power consumption 

Even product granularity, cubic shape, the abrasion in the working surface of movable cones is even. 

Structure introduction: cone crusher mainly consists of frame, horizontal shaft, movable cone, balance wheel, eccentric, upper crushing wall (fixed cone), under crushing wall (movable cone), Hydraulic coupling, lubrication system, hydraulic system, control system and so on. 

Movable cone and fixed cone are being set. When movable cone swings, near the discharging open of the crushing chamber, there is parallel trough with equal gap between movable cone and fixed cone to make sure the final size even. Feed open is not big and only handles the materials after primary crushed. 

This series cone crusher uses dry oil and water as two sealing ways, so that the dust will not enter into the inner of the machine, thus ensure the cleaning of the Run free oil, extend the life of plain bearings, thrust ball bearing , and make the machine running reliably.

Technical Data 

Notices in the working process:

1.Please read operation manual carefully before use. And the machine may only be operated by fully authorized and trained person.

2.Make sure that the machine starts without any load. The machine can only be started after all people are away and wear safty hemlet and pay attention to flying stones,please stand outside the safe distance.

3.when machine runing, all adjustment,clearance or check-up are strictly prohibited. Keep away from any running parts. Overladed operation is strictly prohibited.

4.Lubriate and maintain the machine timely. Before halt for check, feeder should be first stopped feeding and make sure the stones are all out of the machine silo.

Guarantee and Services:

Warranty:

The guarantee period for equipment is one year,excluding wearing parts.During this period,if any defects,the seller will resolve them free of charge.

Pre-sales Service:

a.Help customers find the right product by professional technology and business consultation.

b.Provide plans of the machines installation freely.

c.Could make customized products according to the clients’ requirements.

After-sales Service:

a.Highly inspecting equipments in every working procedure, quality comes first;

b.Fast & Safe Delivery;

c.Assisting our clients for foundation construction of equipments;

d.Dispatching engineers to install and debug equipments;

e.Training the first-line operators on site.

Cooperation with foreign customers

Certificates 

Order Online: 

If you're interested in the product, please submit your requirements and contacts and then we will contact you in two days. We promise that all your information won't be leaked to anyone.