Professional Performance Stone Cone Crusher For Mining Industry

Brief introduction

Cone crusher is suitable for crushing various kinds of ores and rocks with medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment, and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber and not damage the cone crusher.The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make sure reliable performance. The type of crushing chamber depends upon the usage of the crushed ores. The standard type(PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

Working principle 

The working parts are two cutter haeds, also called cones; one is fixed cone ( also called outer cone), the other one is movable cone ( also called inner cone), please refer to the picture. The outer cone is fixed, which is one part of frame; the movable cone is pluged freely in the eccentric bush, so the central axis between the fixed cone and the movable cone intersects and forms into a bevel. When rotating, the movable cone rotates along the inner suface of the fixed cone. The place that the movable cone pressed against the fixed cone becomes the crushing cavity, where the materials is pressed, impacted and bent by the movable cone. The place that the movable moves away from the fixed cone becomes the discharging open, where the crushed materials is discharged out under the role of gravity, and the materials are sent from the feed open.

Working characteristics  

Movable cone rotates continuously, and the material crushing process and the unloading process works alternately along the work surface, which realizes the high output.

The materials are pressed, bent and sheared in the two cones, and can be easily crushed; lower power consumption

Even product granularity, cubic shape, the abrasion in the working surface of movable cones is even.

Structure introduction

Cone crusher mainly consists of frame, horizontal shaft, movable cone, balance wheel, eccentric, upper crushing wall (fixed cone), under crushing wall (movable cone), Hydraulic coupling, lubrication system, hydraulic system, control system and so on.

Movable cone and fixed cone are being set. When movable cone swings, near the discharging open of the crushing chamber, there is parallel trough with equal gap between movable cone and fixed cone to make sure the final size even. Feed open is not big and only handles the materials after primary crushed.

Technical Data of Cone Crusher:

Note: This specification is just reference, any changes are subject to the products.

Our Services  

Per-sale:
(1) According to customer's special requirements, design and manufacture of products.(2) the company free of charge to the user onsite engineering and technical personnel planning site for the user to design the  best processes and programs

Sale:
(1) product acceptance.
(2) to help customers develop construction programs.

After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3)complete sets of equipment installed.

Our certificates

Cooperation with foreign customers

Order Online:

If you interested in the products, please submit your inquirements and contact and then we will contact you in two days. We promise you that all your informantions won't be leaked to anyone.

Skype: thf1991050512

Name: Sally

Websit: