ITC VA-6000RM Evacuation Voice Alarm System Used Remote Paging Microphone

    VA-6000RM is used for remote control VA-6000 system, allowing remotely control for system voice message information and zones paging by users, it can drive 8 zones and extended zones or groups by Microphone Extension unit( VA-6000EM) to 64 zones, each can connect max 7 extension unit and every extension keyboard have 8 zones.

ITC VA-6000RM Evacuation Voice Alarm System Used Remote Paging Microphone

• One press to select zones, which is simple and intuitive.
• Parallel transmission; extend the transmission distance by CAT-5.
• Obvious system fault and module status indicator.
• Supporting zones or groups extension.
• With line audio input and adjustable input volume.
• Paging button mode and PTT mode are all available.
• Supporting redundant wiring.
• DC 24V Phantom Power supply. 

ITC VA-6000RM Evacuation Voice Alarm System Used Remote Paging Microphone

* Microphone output level is adjusted.

* Ontrol priority right is available by VA-6000ST.

* Build-in Hi-Fi monitor speaker, with  monitor output.

* One press into the paging status.

* External Headphone jack; can monitor or record paging voice.

ITC VA-6000RM Evacuation Voice Alarm System Used Remote Paging Microphone

ITC VA-6000RM Evacuation Voice Alarm System Used Remote Paging Microphone

1   Goose Mic Socket.

2   Fault reset/Zone closed.

3   Full zone selection.

4   The status indication of main power supply in the system:

     (1) Green - Normal status of all the equipments and main power supply module in the system

     (2) Yellow - Unusual status of any equipment or main power supply module in the system

5   The status indication of backup DC power supply in the system:

     (1) Off - Normal status of all the equipments and backup power supply module in the system.

     (2) Yellow - Unusual status of any equipment or main power supply module in the system.

6   Unusual status of any equipment or module in the system:

     (1) Off - Normal status of all the equipments and modules.

     (2) Yellow on or flashing - All the equipments or module of the system are in fault status.

7   Testing button of the indicators on the panel: if this button is pressed, the indicators on the panel are on from green, red, to yellow, which means it is in normal status.

8   The status of the goose mic:

     (1) Off - Goose mic is normal.

     (2) Yellow - There is fault in the goose mic.

 9   Working status of the amplifiers in the system:

     (1) Off - All the amplifiers including backup amplifiers are working normally.

     (2) Yellow - All/Any of the amplifiers including backup amplifiers have fault problem.

10  Zone working status indicator and selection button.

11  BGM control of the master unit:

     (1) Off - Normal status.

     (2) Green - Working status.

     (3) Yellow - Fault.

12  Line input audio selection control button.

13  Goose mic and mic line input selection button.

14  Zone and zone function selection button.

15  Paging switch.

ITC VA-6000RM Evacuation Voice Alarm System Used Remote Paging Microphone

1   Networking interface.

2   Networking address and function configuration ("1,2" bits: Equipment address control; "3" bits: Configuration panel; "1,5" : Paging button control mode-light touch or PPT mode; "4,5" bits: Main and backup units to connect the terminal resistance control; "6" bits: Local paging monitoring control).

 3   PPT mic output volume adjusting.

 4   Monitoring volume.

 5   Monitoring audio output.

 6   Line input volume adjusting.

 7   Line audio input.

 8   DC 24V input.

 9   Power Switching.