Specifications

High definition HDMI extender

I.Description: 

This HDMI Extender is based on the HDBaseT technology. It extends your HD display with the resolutions of 1080p/60Hz up to 200 feet (60 meters) away from your HDMI or DVI-D source using one . It also extends Ethernet and provides an IR back channel to control AV sources using the same CAT5e/6/7 cable. The three Ethernet ports on both the Sender and Receiver are connected to standard network devices such as 100Base-T routers and hubs. Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.

II.Features:

1,Support HDCP

2,Support uncompressed HDMI signal.

3,Enables HDMI10.2 Gbps and 100Mbps Ethernet in parallel over a single 100m Cat5e/6 cable.

4,Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.

5,Support 1080p@60Hz@48bit pixels

6,Support 3D pass-through.

7,Support CEC pass-through.

8,Supports uncompressed audio such as LPCM.

10,Supports compressed audio such as DTS Digital, Dolby Digital(including DTS-HD and Dolby  True HD)

11, There are 3 standard Ethernet ports with switching capabilities on each unit. There is no difference 12,between the 3 and any type of connection topology is permitted.

13, Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.

14,CAT5e/6/7 cable follows the standard of IEEE-568B.

III.Specification:

IV.Picture: