Specifications

1. cylindrical grinding machine wholesale
2.Cross liner guideway more efficient
3.Converter headstock & Easy operation

 cylindrical grinding machine wholesale

 

Features:

 

 

The M14 series universal cylindrical grinders are one of the most important products . We started our career by manufacturing the cylindrical grinders. For these years we have supplied many high quality cylindrical grinders for domestic and abroad market.

 

 

 M14series type universal cylindrical grinding machines are used for grinding external or internal surfaces of rotary work-pieces of cylinder and taperworkpiece in almost every country all over the world because of the high quality with competitive price.

 

 

 

The longitudinal movement of the worktable is driven by hydraulic or by hand wheel. The worktable can rotate to a certain degree so as to be suitable for grinding taper. 

 

 

 

 The wheel head cross feed is driven by hydraulic, which realizes automatic periodical feed and rapid feed. It can also do rough and fine feed through hand wheel. 

 

Specifications and Technical Parameters

Model Deseription	unit	Specifications
		M1420×500	M1420×750	MW1420×500	MW1420×750
General capacity
Distance between centers	mm	500	750	500	750
Centre heigh	mm	118	118	135	135
Dia.Ground(O.D)	mm	8~200	8~200	5~200	5~200
Dia.Ground(I.D)	mm	13~100	13~100	25~100	25~100
Max.length ground(O.D)	mm	500	750	500	750
Max.length ground(I.D)	mm	125	125	125	125
Max weight of work piece	kg	50	50	100	100
Workhead
Swiveling angle		+90	+90	+90	+90
Center taper	MT	3	3	4	4
Spindle speed	r/min	60,85,230,120,170,460	60,85,230,120,170,460	25~380	25~380
Wheelhead
Wheel spindle speed	r/min	1820	1820	1670	1670
Wheelhead rapid travel	mm	20	20	50	50
Max travel	mm	150	150	205	205
Swiveling angle	°	-180~ ±30°	-180~ ±30°	+10°	+10°
Hand feed per.rev	mm	1	1	rough:2.0 fine:0.5	rough:2.0 fine:0.5
Hand feed per.gra	mm	0.00125	0.00125	rough:0.01 fine:0.0025	rough:0.01 fine:0.0025
Max dimension of wheel(OD×W×ID)	mm	400×40×203	400×40×203	400×50×203	400×50×203
Internal grinding
Spindle speed	r/min	14000	14000	10000/15000	10000/15000
Dimension of wheel	mm	max:50×25×13 min:17×20×6	max:50×25×13 min:17×20×6	max:30×25×10 min:17×20×6	max:30×25×10 min:17×20×6
Table
Hand feed per rev.	mm	6	6	6	6
Max swivelling angle of table	°	clockwise:5° widdershins:9°	clockwise:7° widdershins:9°	clockwise:3° widdershins:9°	clockwise:3° widdershins:8°
Longitudinal traverse speed of table	m/min	0.1~4	0.1~4	0.1~4	0.1~4
Tailstock
Center taper	MT	3	3	4	4
Quill travel	mm	25	25	30	30
Motor
Wheelhead motor power	Kw	3	3	4	4
Internal grinding	Kw	The same motor with wheelhead motor		1.1	1.1
Power of workhead motor	Kw	0.25	0.37	0.55	0.55
Machine
Gross weigh	Kg	2400	2900	4100	4300
Packing dimension	mm	1920×1450×2050	2130×1450×2050	2350×2030×2050	2750×2030×2050

 

 

Standard accessories:complete set of eletrical equipment, coolant equipment, wheel periphery dresser, wheel flange, wheel balancing arbor, leveling wedge, open-type steady rest, internal grinding attachment.

 

 

Optional accessories: Balance stand, Close steady rest, Radius wheel dresser, End wheel dresser, Coolant tank with magnetic seperator, coolant tank with magnetic seperator and paper filter.

 

 

About the Cross Guideway, we choose the linear guieway, so that to make the MW1420 more efficient.

 

 

About the head stock, we adopt the coverter to control the headstock rotating speed. We put the controller on the control panel to make the operation much easier.