Specifications

1.used cylindrical grinding machines
2.Cross liner guideway more efficient
3.Converter headstock & Easy operation

used cylindrical grinding machines

  

Features:

 

 

 

The longitudinal movement of the worktable is driven by hydraulic or by hand wheel. The worktable can rotate to a certain degree so as to be suitable for grinding taper. 

 

 

 

 The wheel head cross feed is driven by hydraulic, which realizes automatic periodical feed and rapid feed. It can also do rough and fine feed through hand wheel. 

 

Specifications and Technical Parameters

item/model			unit	MW1320
General capacity	Distance between centers		mm	500,750
	Center height		mm	135
	Dia.ground (O.D.)		mm	5-200
	Max.length ground (O.D.)		mm	500,750
	Max.weight of workpiece		kg	100
workhead	Center taper		MT	4
	Spindle speed		r/min	50HZ:25-380
wheelhead	Wheel spindle speed		rpm	1335
	Wheelhead rapid travel		mm	50
	max.travel		mm	205
	Hand feed per.rev.		mm	rough:2 fine:0.5
	Hand feed per gra.		mm	rough:0.01  fine:0.0025
	Weel size ( O.D.* W *D)		mm	500*50*203
	Peripheral velocity		m/s	35
table	Hand feed per rev.		mm	6
	Max. Swiveling angle of table	clockwise	°	3°
		Anti clockwise	°	8°(500) 9°(750 )
	Longtidual speed range of table		m/min	0.1-4
tailtock	Center taper		MT	4
	Quil travel		mm	30
motor	Wheelhead motor power		kw	5.5
	Workhead motor power		kw	0.75
machine	Gross weight		T	4(500),4.2(750)
	Packing dimension		cm	260*206*205(500) 300*206*205(750)

 

Standard accessories:complete set of eletrical equipment, coolant equipment, wheel periphery dresser, wheel flange, wheel balancing arbor, leveling wedge, open-type steady rest, internal grinding attachment.

 

 

Optional accessories: Balance stand, Close steady rest, Radius wheel dresser, End wheel dresser, Coolant tank with magnetic seperator, coolant tank with magnetic seperator and paper filter.

 

 

The work head spindle, wheel head spindle, internal grinding spindle, coolant pump, hydrodynamic and hydrostatic oil pump are driven by separate motors. 

 

Each moving parts of the machine has electric, hydraulic and mechanic interlock structure machine is well designed with pleasing appearance, all control lever are centralized in panel make operating easy

 

The wheel dresser can be assembled on the worktable surface or on the tailstock.

 

From the above Our  M13 series universal cylindrical grinder is good looking and practical. 

 

The milling machines are packed by the fumigation wooden pallet which is easy for clients to transport or load and unload.