Product Details

Product Description

Packing List

Name	Quantity	Remark
Fingerprint Reader F2U	1
User Manual	1
Screwdriver	1
Rubber Bungs	3	6*27mm used for fixing
Self Tapping Screws	3	3.5*27mm used for fixing
USB Cable	1

Descriptions

F2U is a standalone fingerprint reader with exquisite & unique appearance and wiegand 26/34 output functions. The machine uses the most advanced fingerprint identification technology and very safe, which supports to open door by following three ways: fingerprint/card/fingerprint+card.

It’s not only widely used in the commercial and industrial field, such as offices, factories, warehouse, banks, laboratories, but in the small shops and households.

The operations of this product are all done by the software installed in your PC.

Features

- Standalone Fingerprint reader

- Supports USB & RS485/232 communication

- 3,000 fingerprint users and 3,000 card users

- Supports to back up users’ data (fingerprint & card user info)

- Supports to upload & download users’ data

- Can be used as a standalone access control

- Wiegand26/34 output for connecting to a controller

- One relay output for control door

- Built-in buzzer

- Built-in light dependent resistor (LDR) for anti-tamper

- Supports to open door by fingerprint/card/fingerprint+card

- Fast Verification: Less than 1s base on full enrollment of 3,000 fingerprint

- Two-year warranty

Specifications

Item	Parameters
CPU	32-bit RISC Core, 120MHz, 1MB FLASH, 128K SRAM
Sensor	500DPI optic sensor
Cards	EM 125KHz
Capacity	Fingerprint: 3,000; cards: 3,000
Each user can enroll	2 fingerprints & 1pc card
ID number	Wiegand26 output : 1~16777215; Wiegand34 output : 1~4294967295
Verification mode	“or” mode : fingerprint or card (verify fingerprint or card will output wiegand signal)
	“and” mode : card and fingerprint (after card verify requires fingerprint will output wiegand signal)
Response time	<1s(full of 3,000 fingerprints)
FAR	< 0.0001 %(security level is 3)
FRR	< 0.1 %(security 3)
Reading Distance	5~10cm
Security level	1 ~ 5, default setting : 3
Access interface	Wiegand output mode : Wiegand26 or Wiegand34 can be set
	Relay output (option) : passive contact output(NO, NC, COM)
Communication interface	RS485	9600~115200 BPS can be setting; no parity; 1stop bit; Flow Control: None
	USB	USB1.1 Full speed
Input voltage	9V-15V DC
Working current	≤100mA
Working environment	Temperature: -20°C ~ 80°C, Humidity : 20% ~ 80%