Specifications
Fingerprint Reader, Access Cotnrol Systems1. Fingerprint Capacity:3000
2. Fingerprint & ID Card
3. Wiegand 26/34
Product Description
Packing List
Name | Quantity | Remark |
Fingerprint Reader F2U | 1 |
|
User Manual | 1 |
|
Screwdriver | 1 |
|
Rubber Bungs | 3 | 6*27mm used for fixing |
Self Tapping Screws | 3 | 3.5*27mm used for fixing |
USB Cable | 1 |
|
Descriptions
F2U is a standalone fingerprint reader with exquisite & unique appearance and wiegand 26/34 output functions. The machine uses the most advanced fingerprint identification technology and very safe, which supports to open door by following three ways: fingerprint/card/fingerprint+card.
It’s not only widely used in the commercial and industrial field, such as offices, factories, warehouse, banks, laboratories, but in the small shops and households.
The operations of this product are all done by the software installed in your PC.
Features
- Standalone Fingerprint reader
- Supports USB & RS485/232 communication
- 3,000 fingerprint users and 3,000 card users
- Supports to back up users’ data (fingerprint & card user info)
- Supports to upload & download users’ data
- Can be used as a standalone access control
- Wiegand26/34 output for connecting to a controller
- One relay output for control door
- Built-in buzzer
- Built-in light dependent resistor (LDR) for anti-tamper
- Supports to open door by fingerprint/card/fingerprint+card
- Fast Verification: Less than 1s base on full enrollment of 3,000 fingerprint
- Two-year warranty
Specifications
Item | Parameters | |
CPU | 32-bit RISC Core, 120MHz, 1MB FLASH, 128K SRAM | |
Sensor | 500DPI optic sensor | |
Cards | EM 125KHz | |
Capacity | Fingerprint: 3,000; cards: 3,000 | |
Each user can enroll | 2 fingerprints & 1pc card | |
ID number | Wiegand26 output : 1~16777215; Wiegand34 output : 1~4294967295 | |
Verification mode | “or” mode : fingerprint or card (verify fingerprint or card will output wiegand signal) | |
“and” mode : card and fingerprint (after card verify requires fingerprint will output wiegand signal) | ||
Response time | <1s(full of 3,000 fingerprints) | |
FAR | < 0.0001 %(security level is 3) | |
FRR | < 0.1 %(security 3) | |
Reading Distance | 5~10cm | |
Security level | 1 ~ 5, default setting : 3 | |
Access interface | Wiegand output mode : Wiegand26 or Wiegand34 can be set | |
Relay output (option) : passive contact output(NO, NC, COM) | ||
Communication interface | RS485 | 9600~115200 BPS can be setting; no parity; 1stop bit; Flow Control: None |
USB | USB1.1 Full speed | |
Input voltage | 9V-15V DC | |
Working current | ≤100mA | |
Working environment | Temperature: -20°C ~ 80°C, Humidity : 20% ~ 80% | |
