Specifications

HY- Fuel Nozzle Tester

most reasonable price to buy the most satisfactory products
good service attitude 

                                        good reputation

  Taian Haiyu Machinery.,Ltd is a modern technological company company combining with study ,producing ,marketing and service.We have a number of engineers working on producing and designing engine testing equipments and also have some sophisticated staff specialized in the computer soft and hard wear design.This product is one of our new products .

Nozzle Tester

1, It can test and calibrate the nozzle injection pressure, spray quality, fuel testing angle and leakage of the needle valve.

2, It can also test light crude fuel injection valves with connected to a special ordered pressure gauge.

Pressure range (Mpa): 0-60Mpa.

3, Outside dimension: 160mm*100mm*380mm

Tank Volume (L): 1.0L

Technical Parameter

1.     Diameter of pressure gauge: 150mm

2.     Pressure gauge range:  0∼60MPa

3.     Pressure gauge accuracy rating: 1.6

4.     Largest tested pressure: 60MPa

5.     Capacity of fuel tank: 3.37L

6.     Overall dimension (L×W×H):315mm×285mm×490mm

7.     Net weight: 30Kg

8.   Fixture included

Performance of the nozzle tester

Block the joint where the nozzle is connected. Pump oil to a pressure -over 30 MPa. Then stop pump and watch the pressure descending from 30 MPa. It is less than 2 MPa. within 3 minutes.