Specifications

1.injecting pressure
2.atomizing quality
3.injecting angle
4.needle valve seals
weight:5kg

PS400A-II Nozzle Tester

High testing accuracy

60Mpa

Main technical parameters

1.     diameter of pressure gauge    150mm

2.     pressure gauge range         0∼60MPa

3.     pressure gauge accuracy rating  0.4

4.     largest tested pressure        60MPa

5.     capacity of fuel tank         1.6L

6.     overall dimension (L×W×H )   250mm×150mm×480mm

7.     net weight                5Kg

8. High testing accuracy

 

 

S60H Nozzle tester (testers for test nozzle and holder assemblies and engine nozzle and holder assemblies, informally referred to as nozzle testers) can be used  to perform the following tests on injection nozzles of sizes P, R, S and T with the appro-priate nozzle holders: 

 

A  Opening pressure

 

B  Jet Shape

 

C  Tightness of fitting

 

D  Assembly tightness

 

E Chatter behavior

 

 

Fill oil tank at least halfway with test oil
complying with ISO 9001.

Unscrew oil tank slightly.

Operate manual lever unit the oil exits at the pressure outlet with no bubbles.

Tighten oil tank again by hand.