Specifications

Pump testing equipment
Cast iron operation platform
Stable rail pressures
Secondary filter

HY-NK Fuel Injection Pump Testing Equipment

 

 

 

function:

1. Adjusting each cylinder delivery at any speed.
2. Test point and interval angle of oil supply of injection pump.
3. Adjusting the performance of different speed regulator.
4. Checking of the sealing of injection pump.
5. Testing of oil return of distributing pump.
6. Checking of the pressure compensatory device of distributing pump.
7. Measuring of the internal pressure of distributor pump.
8. Measuring of the advance angle.
9. Measuring the travel meters of gear lever

 

 

1.Operating position can be on both sides

2.tank capacity:45L

3.temperature stabilization:40°C±2°C

4.air pressure:-0.03—0.3 MPa

5.test oil filtering unit:5u

6.DC supply: 12V/ 24V

7.Three figures show that the fuel temperature control

8.feed pressure: Low pressure 0-0.4Mpa  high pressure  0-4Mpa

9.4-digit display injection advance angle

10.displayed: Pressure Vacuum

 

 

 

 

 

1. Measurement of each cylinder delivery at any speed.
2. Test point and interval angle of oil supply of injection pump
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pumps.

5. Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pumps.
7. Testing the electromagnetic valve of distributor pump.(12V/24V).
8. Measurement the internal pressure of distributor pump.
9. we are main manufacture the fuel injection pump test  bench and balancing machine.