Specifications

Pump testing equipment
Cast iron operation platform
Stable rail pressures
Secondary filter

HY-NK Fuel Injection Pump Testing Equipment

 

1.      Test each cylinder's oil supply capacity at various rotation speeds.

2.      Statically check the start point and interval angle of oil supply of each cylinder.

3.      Check and adjust the performance of mechanical speed regulators.

4.      Test the electromagnetic valve of distribution pump.

5.      Check the performance of pneumatic speed regulator.

6.      Check the performance of pressure compensators

7.      Measure the advance angle of advance device

8.      Test the sealing performance of injection pumps.

9.      Test the interior pressure of distribution pumps.

 

10.  Test the negative pressure performance of pneumatic speed regulators.

 

11.  Test the oil supply pressure of distribution pump.

 

12.  Measure the oil-return quantity of distribution pump.

 

13.  Self-suction joint.

 

14.  Printer (optional).

 

15.  Data-base (optional).

 

 

 

 

adjustable cyliners numbers	power supply (v/hz)	out power (kw)	technical  specific property	capability with pump type
12	380/50 220/50	5.5-45	computer 0-4000prm 10 rpm preset temperature control system DC power supply(12/24v) air supply internal pressure of ve pump advanced angle travel of tooth  bar database printer function	all in-line ,distribution pump and rotary pump

 

 

 

 

 

1.Operating position can be on both sides

2.tank capacity:45L

3.temperature stabilization:40°C±2°C

4.air pressure:-0.03—0.3 MPa

5.test oil filtering unit:5u

6.DC supply: 12V/ 24V

7.Three figures show that the fuel temperature control

8.feed pressure: Low pressure 0-0.4Mpa  high pressure  0-4Mpa

9.4-digit display injection advance angle

10.displayed: Pressure Vacuum

 

 

 

 

 

1. Measurement of each cylinder delivery at any speed.
2. Test point and interval angle of oil supply of injection pump
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pumps.

5. Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pumps.
7. Testing the electromagnetic valve of distributor pump.(12V/24V).
8. Measurement the internal pressure of distributor pump.
9. we are main manufacture the fuel injection pump test  bench and balancing machine.