Specifications

1.Pump Test Machine
2.simple operation
3.Alpha frequency converter
4.test EuroII pump
5.three phrase four wire

HY-WK Fuel Injector Pump Test Machine

Usage: 

When testing different pumps, the test bench use proper attachments, and carry out the following debugging. 

 

1 Test different cylinder oil supply condition quantity and oil supply evenness under different revolution 

 

2 Test oil supply starting point and interval angle 

 

3 Test working performance

 

4 Test pressure compensation performances

 

5 Test cold starting device and solenoid valve performance 

 

6Test distribution pump oil return under different revolution (optional) 

 

7 Test distribution pump inner pressure under different revolution   

 

8 Test injection pump seal performance  

 

9 Test oil transfer pump self priming performance 

 

10 Save, amend oil injection pump debugging date and form database  

 

11 Check commons diesel injection pump debugging data quick  

 

       This system is composed of the screen display and the sensor part,the screen display part is composed of the screen controller and display,the screen display dynamic simulates in graduated cylinder's column of oil,in the vision the image is direct,simultaneously disappears the error witch the oil removing froth and the artificial reading create.the sensor part locates at the drip tank,is equipped with  auto draining oil system,personnel no longer manual frequency to drain the oil,the labor intensity reduces greatly.

 

1 Output power: 7.5kw, 11kw, 15kw, 18.5kw, 22kw(Optional) 

 

2 Power supply: 3-Phase, 380V/50HZ, 220V/60HZ(Optional) 

 

3 DC.Supply:12/24V 

 

4 Test pump cylinders: 12 pieces 

 

5 Range of speed:+/-4000RPM 

 

6Fuel pressure: 0-0.6Mpa, 0-6Mpa, 0-0.16Mpa, 0-1.6Mpa 

 

7 Height of spindle centers:125mm 

 

8Principle axis revolution: ±1r/min 

 

9 Fuel supply drive motor power: 1.1KW 

 

 

  Checking of each cylinder's injection timing with static.
Checking of the LDA.
Checking of the mechanical governor.
Checking of the pneumatic governor.
Checking of the vacuum capacity of governor.
Measurement of the internal pressure of distributor pump body.
Measurement of the reflux delivery of distributor pump.
Testing of the electro-magnetic valve of distributor pump.
Checking of the transfer pump.
Checking of the sealing of injection pump body.

Configuration:

1. Power:11KW/15KW
2. Speed Range: stepless frequency conversion, multi-gear speed overhead, speed :50-400 circle/min or at will
3. the number of station can be debugged:12
4. fuel supply:0-0.4MPa(low)  0-4MPa(high)  filtration:10um
5. fuel can be cooled by air and heated by heater. The temperature can be displayed in the screen and controlled automatically.
6. overall dimension:length:2100 width:700 height:1470
7. net weigh:1000kg

Technical specification:

1.      Directly driven by motor, variable frequency stepless speed regulation.

2.      Fuel temperature controlled automatically

3.      Random speed can be pre-set

4.      Complete function , good reliability

5.      Air supplier and vacuum supplied