Specifications

Type HS pumps are cantilevered,horizontal,centrifugal slurry pumps.

Type HSpumps are cantilevered,horizontal,centrifugal slurry pumps. Designed for handing abrasive,high density slurries in the metallurgical.mining,coal,power,building material and other industrial departments etc. The pump of this type also may be installed in multistage series. 

The frame plates for type HS pumps such as interchangeable, hard metal or pressure moulded elastomer liners

The impellers are made of hard metal or pressure moulded elastomer liners, 

The shaft seals may be adoptable of gland seal or centrifugal shaft seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to andy eight positions to suit installations and applications  

All types of slurry pump may be adopted with the same series of driving assembly , included frames and bearing assemblies. A extremely rigid shaft of larger diameter with short overhang to impeller eliminates deflection and vibration under all condition  of used. Large, wide, heavy duty, grease lubricated single or double rows taper roller bearings and roller bearings are fitted based on the transmitting power. The bearings are more than ample to carry all radial and thrust loads at maximum pump duty and have an unusually long life factor. spigotted end covers close the housing and carry labyrinth sleeve and ring ( bearing seal) to prevent slurry and dirty entering in bearings.

 

Size: 1-18 inches 

Capacity: 3-5000m3/h 

Head: 5-95m 

Material: Cr27, Cr28 and rubber liner material

Seal: Packing seal, expeller seal and mechanical seal