Specifications

Dredging Pipe Floater
1.Strong buoyancy.
2.Good Self-lubrication.
3.Long life-span.
4.Good flexibility.

Dredging Pipe Floater

        UHMWPE is available in a range of thicknesses and cut to the size of the surface to be covered.

         The shell of the float is be made of polythene and the float was filled with polymer foam body. As the bodies of the discharge hose on the water, it has the advantage of high float load capacity, shock resistance,aging resistance and divulsion resistance, etc.   It is the ideal products instead of the traditional float ponton due to his high float load capacity, shock resistance, aging resistance and abrasion resistant, etc.

 

 Features:

      1. Good flexibility, excellent impact resistance, particularly suitable for constructions in open sea.

       2.Good Toughness, divulsion resistance, shock resistance

       3. High abrasion resistance and high impact strength.

       4. Low coefficient friction

       5. Light weight, easy to install and handle, lower costs for moving.

       6. Higher corrosive resistance, longer working life, 3 times longer than steel floaters.

       7. Anti-wave, good resistance to low temperature.

       8. Excellent dielectric properties,  good thermo stability

 

Remark:  2 pieces of floaters form 1 set, 2 sets of floaters form 1 pair. 1pair of floaters could float 6 meter long steel dredging pipe and 1.5m long rubber hose.

 

	Ship Type	ID of Dredging Pipe	float
			(mm) Outer Diameter	(mm) Inner Diameter	(mm) Length
1	200m³	Ø400- Ø420	Ø1300	Ø430	1020
2	350m³	Ø550- Ø560	Ø1300	Ø586	1200
3	1600 Beaver 1600	Ø500	Ø1300	Ø526	1120
4	3800 Beaver 3800	Ø650	Ø1460	Ø670	1200
5	4600 Beaver 4600	Ø700	Ø1500	Ø720	1300
6		Ø800
Remarks: 1.Two pairs of floats form one group, two pieces form one pair.           2. One group of float can support dredging hose in six hose in six meters length.

 

 

Item	Case Function Target	Item	Internal Function Target
Tensile Strength	12Mpa±2	Water Absorption	0.16-0.2g/100cm3
Elongation @ Breaking	10.1%	Breaking Strength	0.8-1.0kg/100cm3
Lash Intensity	31.4KJ/m2	Elongation @ Breaking	4-6%
Bending Strength	15.7 Mpa	Compressive Strength	1.0-2.4kg/100cm3
		Heat-resistance	-50°C — +60°C

 

 

 

 

 

 Meet customer's request:

        In order to meet different requirement of out customer, we will give you some advice to make the product which you received has better quality. We also can manufacture the special size of products according to your request.