Specifications

Marine Floater
1 High quality
2 Shock resistance
3 High float capacity
4 Can be reused.

Marine Floater

 

Discription:

 

        The shell of the float is be made of polythene and the float was filled with polymer foam body. As the bodies of the discharge hose on the water, it has the advantage of high float load capacity, shock resistance,aging resistance and divulsion resistance, etc.   It is the ideal products instead of the traditional float ponton due to his high float load capacity, shock resistance, aging resistance and abrasion resistant, etc.

 

 

Features:

 

         1. Good Toughness, divulsion resistance, shock resistance

 

       2. Low weight, convenient to install and to demount. Low cost of transfering.

 

       3. Anti-wave, corrosion resistance, ageing resistance and long lifetime.

     

       4. Reuse is available.

 

 

	Ship Type	ID of Dredging Pipe	float
			(mm) Outer Diameter	(mm) Inner Diameter	(mm) Length
1	200m³	Ø400- Ø420	Ø1300	Ø430	1020
2	350m³	Ø550- Ø560	Ø1300	Ø586	1200
3	1600 Beaver 1600	Ø500	Ø1300	Ø526	1120
4	3800 Beaver 3800	Ø650	Ø1460	Ø670	1200
5	4600 Beaver 4600	Ø700	Ø1500	Ø720	1300
6		Ø800
Remarks: 1.Two pairs of floats form one group, two pieces form one pair.           2. One group of float can support dredging hose in six hose in six meters length.

 

 

 

 

 

 

 

Item	Case Function Target	Item	Internal Function Target
Tensile Strength	12Mpa±2	Water Absorption	0.16-0.2g/100cm3
Elongation @ Breaking	10.1%	Breaking Strength	0.8-1.0kg/100cm3
Lash Intensity	31.4KJ/m2	Elongation @ Breaking	4-6%
Bending Strength	15.7 Mpa	Compressive Strength	1.0-2.4kg/100cm3
		Heat-resistance	-50°C — +60°C