Fiberglass Woven Roving  for boat making 

Characteristics  

1. Warp and weft rovings aligned in a parallel, flat manner and uniform tension
2. Densely aligned fibers, providing high dimensional stability and easy handing
3. Good moldabllity, fast and complete resin wet-out, enabling high productivity
4. Good transparency and high strength of the composite products

Application 

Fiberglass woven roving is  high-performance reinforcement widely used in hand lay up and robot processes to manufacture boats, vessels, plane and automotive parts, furniture and sports facilities.

Specification

Note: Woven Rovings are available with a width range of 50mm~2600mm and weigth range of 200g/ m2~1600g/ m2. Other specifications are also available on customer request.

Packing

Each Woven Raving is wound onto a paper tube which has an inside diameter of 76mm and the mat roll has a diameter of 225mm. The mat roll is wrapped up with plastic film,and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a cantainer directly or on pallets.

Storage

Unless otherwise specified, Woven roving should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15°C~35°C and 35%~65% respectively.