3000L stainless steel beer ferment equipment
USD $45,999 - $85,999 /Set
Min.Order:1 Set
Jinan Tiantai Beer Equipment Co., Ltd.
3000L Commercial Brewery
1.Introduction
A 3000L commercial brewery is focus on regional market. The capacity request is not so high than macro breweries. Their beers are always sold on shelf in bottle or canning. We are involved in providing different types of medium scale industrial breweries to clients worldwide. The complete setup of these breweries is in compliance with modern brewery standards and specifications. These products enable systematic execution of milling, mashing, fermentation, filtration, filling and other related processes. We subject each brewing system to stringent testing procedures before launching them in the market.
2.The Basic Configuration
1.Grain Milling Unit | Grain Milling Unit [800~1200kg/hr] |
2.Brewhouse Unit [MT+LT+KWT+HLT] | Mash tun+Lauter tun+Brew Kettle/ Whirlpool tun+Hot Liquor Tun |
3.3000L/6000L Fermentation Tank/Unitank | Dished head and 60 degree cone bottom Exterior Shell:SUS304 full welded; TH=2mm 100% TIG welding with pure argon gas shield Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner |
4.Glycol Chilling Unit | GWT+CLT + 2 sets Chiller |
5.Controlling Unit | PLC or instrumentation control panel |
6.CIP Unit | Caustic Tank+ Sterilization Tank+ Transfer&Control |
3.The Welding
We abandoned the argon gas cylinder but adopt The Central System of Argon to make sure the TIG welding with pure argon gas shield. We also increase the using amount of gas when welding, so the quality of the welding line is more higher.
4.Frequently Asked Questions
Q: What size building do I need?
For a brewpub a lot depends on what your yearly volume is and how many different types of beer you want to offer. The minimum surface starts at about 20m2. There are also some estimate area requests in our different brewery systems in specification above.
For microbreweries the main factor is yearly volume. For small microbreweries a floor space of 300m2 is often more than sufficient.For details on your project, we can give you exact dimensions and requirements.
Q: What utilities do I need for a brewery?
Typically water, electricity and drains are needed.
In general 2 and 3 phase electricity is needed and can be 110/220/380/400/415/440 at 50/60Hz.
The size of the water connection is determined by the size of the brewery but for most projects 5.000 liter of water per hour with a pressure of 3 bar is sufficient.
For your steam boiler a natural gas connection or a tank with light oil will be needed.
Because of the temperature, steel pipe drains are preferred in a brewery and sufficient drains are always handy.
For brewery project we provide our customers with detailed requirement on the utilities and their respective location.