Product Details

steel Pipe inside shot blasting machine

Specifications of steel pipe wall sand blasting machine

Steel pipe outer wall sand blasting machine is large, medium and small diameter steel tube, pipes and cylinder shotblast cleaning equipment, using high blasting device of high-speed projectile hit the steel pipe, cast pipe surface, make the fine polished metal color, increase tensile and compressive strength on the surface of the workpiece, make its have certain roughness, achieve anticorrosive, protection tube, prolong the service life of steel pipe.

Advantages of steel pipe outer wall sand blasting machine

*Improving anti-fatigue character of mechanical products and steel structure parts.

*Removing stress concentration

*Extending its wear life.

*Optimize surface technology state of work pieces.

*Increasing cleaning efficiency enormously.

*Reducing labour strength of cleaning job.

*Reducing environmental pollution.

Technical parameters of steel pipe outer wall sand blasting machine

Type		QGW03	QGW07H	QGW10H	QGW12H
Size of cleaning piece(mm)		φ50-φ400	φ150-φ800	φ80-φ1000	φ100-φ1200
Speed of roller(m/min)		2-8	0.5-6	0.5-6	0.5-6
Blast wheel	Abrasive flow rate( kg/min)	2×280	2×360	2×280	2×320
	Power(KW)	2×15	2×30	2×22	2×22
Dust collector	Tyoe	ZJC-40	JZC-48	HR-12	HR-12
	Air volumn( m3/h)	8000	8500	9000	9000
Power(not including dust)(KW)		42.6	77.77	76.57	77.77

Products show:

Our Services

What is the target market for this machine?

The Blaster is designed for customers who require a more sophisticated method than just manual cleaning in preparation for further processing or painting.

What type of abrasive media does it use?

The Blaster is designed to use round steel shot. The shot is recycled inside the system and gets smaller and smaller during the blasting process, until it is completely consumed. Approximately two tons are required for start-up, and approximately 20 pounds are consumed per blasting hour. Replenishment is easily done as needed.

What utilities are needed to run the Blaster?

The electrical system runs on three-phase input and a transformer will be provided for your supply voltage if required. Clean and dry compressed air supply is also needed.

What does it cost to operate?

The highly efficient turbines require much less power that competitor's shot blast machines. Including abrasive consumption, power consumption and maintenance, the total operating cost averages around $20 per hour in US. When comparing this to your current methods, keep in mind that the Blaster is at least 4 to 5 times as productive as manual cleaning and only one operator is required to load and run the machine while it is working. Labor costs are much lower, plus you will have a huge amount of extra capacity for cleaning.

Are there any special operator skills required for the Shot Blaster?

No, once the machine is installed and adjusted by our technician, running the machine consists of merely switching it on and setting the speed dial for the desired surface finish. Maintenance is simple too.

Commercial terms for shot blasting machine:

1. MOQ:1set

2. Quality guarantee: 12 months from installation date

3. Payment term: 30% downpayment by T/T, 70% balance paid by L/C

4. Over-sea engineers install guide is available, customer pays for their tickets, hotel and diet etc. buyers need arrange skilled worker and prepare insallation machinery and tools.

5. Using manual, maintenance manual and electrical diagram in English version.