Product Details

Hook type Shot Blasting Machine

Product Description

This machine is for surface cleaning or strengthening treatment of small castings,forging parts in industry of foundry, building, chemical, motor, machine tool etc. It isspecial for surface cleaning and blasting strengthening on various types, smallproduction castings, forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wall parts which is not suitable for impact.

Application: machine is specifically designed for the continuous external surface treatment of pipes and cylindrical parts (bottles reservoirs, etc. ).
Typical employment: Coating with bituminous products oxide and calamine removal, preparation to painting of pipes and cylindrical parts, surface preparation to rubberizing.
Equipment: Frequency inverter for rolls conveyor, blast wheel, abrasive recycle system, digital control panel, optional customized automatic loading and offloading system. , dust collector.
The machine is completely integrated and only requires infeed and outfeed conveyors.
includes full installation and training with the purchase.
The blast cabinet is made of manganese steel for long life and is further reinforced with replaceable manganese liner plates. This well sealed chamber stops rust and dust particles from entering the shop.
The heavy duty, variable speed chain driven internal roller conveyor is easily connected to extension input and output conveyors. Transfer speed is easily adjusted to achieve the desired surface finish.
The conveyor speed monitor automatically controls the starting and stopping of the shot blast action.
Four highly efficient direct drive High Performance Turbine blast wheels achieve the highest surface finish quality while requiring less power, further reducing cleaning costs.
The complete abrasive recycling system comprises collection hopper, screw conveyors, two bucket elevators, air separator, drop-out box, maintenance platform and four high-performance turbines with abrasive flow-control units.
The high velocity abrasive blow-off unit at the cabinet exit keeps the shot in the system and out of your shop.
Within the abrasive recycling system, a large highly efficient air wash separator prolongs shot life and a drop-out box removes coarse particles to avoid destruction of filter elements.
All inspection ports are easy to access and a maintenance platform is standard.

Parameter:

Item	Unit	Q376	Q376B	Q378c	Q3710	Q3720	Q3730	Q3750	Q37100
Maximum weight of cleaning	Kg	500	600	800	1000	2000	3000	5000	10000
Abrasive flow rate	Kg/min	2*200	2*200	2*250	2*250	3*250	3*250	4*250	5*250
Ventilation capacity	m³/h	5000	5000	5000	5000	9000	11000	14000	16000
Lifting amount of elevating conveyor	T/H	24	24	30	30	45	45	60	75
Separating amount of separator	T/H	24	24	30	30	45	45	60	75
Max overall dimensions of suspender	mm	Ø600 *1200	Ø700 *1200	Ø1000 *1600	Ø1200 *1800	Ø1400 *2200	Ø1600 *2300	Ø1800 *2500	Ø3000 *3000

What is the target market for this machine?

The Blaster is designed for customers who require a more sophisticated method than just manual cleaning in preparation for further processing or painting.

What type of abrasive media does it use?

The Blaster is designed to use round steel shot. The shot is recycled inside the system and gets smaller and smaller during the blasting process, until it is completely consumed. Approximately two tons are required for start-up, and approximately 20 pounds are consumed per blasting hour. Replenishment is easily done as needed.

What utilities are needed to run the Blaster?

The electrical system runs on three-phase input and a transformer will be provided for your supply voltage if required. Clean and dry compressed air supply is also needed.

What does it cost to operate?

The highly efficient turbines require much less power that competitor's shot blast machines. Including abrasive consumption, power consumption and maintenance, the total operating cost averages around $20 per hour in US. When comparing this to your current methods, keep in mind that the Blaster is at least 4 to 5 times as productive as manual cleaning and only one operator is required to load and run the machine while it is working. Labor costs are much lower, plus you will have a huge amount of extra capacity for cleaning.

Are there any special operator skills required for the Shot Blaster?

No, once the machine is installed and adjusted by our technician, running the machine consists of merely switching it on and setting the speed dial for the desired surface finish. Maintenance is simple too.

Commercial terms for shot blasting machine:

1. MOQ:1set

2. Quality guarantee: 12 months from installation date

3. Payment term: 30% downpayment by T/T, 70% balance paid by L/C

4. Over-sea engineers install guide is available, customer pays for their tickets, hotel and diet etc. buyers need arrange skilled worker and prepare insallation machinery and tools.

5. Using manual, maintenance manual and electrical diagram in English version.