Specifications

The performance is strongly stable. The media is Sebacic Acid or mixed oil, in result of high accuracy.

Summary

LGSY series of piston pressure gauge are researched by Xi’an Wellwork Co.,Ltd, which are in accordance with the newest government’s verification and the rules of JJG59-2007. Because its main parts adopt the material of tungsten carbide, which are coefficient of linear expansion with the characteristics of high hardness and low temperature. It improves the wearable identity and endures more but not be deformed at all. The performance is strongly stable. The media is Sebacic Acid or mixed oil, in result of high accuracy.

For adopting new material and techniques, all indexes are improved primly.

Characteristics

1. Piston and piston vat adopt the material of tungsten carbide, which are coefficient of linear expansion with the characteristics of high hardness and low temperature. The working temperature is wide and characteristics are stable.

2. Because of underslung overload, we put the weight on its shelf and move it stably; accurate pressure data will be showed.

3. When the pressure is over 25MPa, the media which is Sebacic Acid has little thickness to insure manometer to keep high accuracy.

4. Weight are non-magnetism and stainless material.

5. The working place of piston is detected by displacement sensor, and the length of up and down’s piston is ±1.5mm. The meter has acute, striking and accurate characteristics.

6. Wide pressure range. When the date is 1MPa, the basic mistake is ±0.01%,±0.02%,±0.05% ,±0.005%. For a LGSY-100, can be instead of three pieces of domestic manometer of 6,60,100MPa together.

7. It is very simple and convenient to put more pressure or adjust though at 100MPa.

Main Data

1, Test range & degree of accuracy

Temperature(20±5) °C,fluctuation is less than 0.5°C-Test data is following in F1

Model	Range(Mpa)	Accuracy
LGSY-6	0.04~0.6	±0.05% ±0.02% ±0.01%,±0.005%
LGSY-60	0.1~6
LGSY-250	0.5~25
LGSY-600	1~60
LGSY-1000	2~100

 

 

 

 

 

 

(Format I)

Daily Servicing Skills

1. Keep the gauge clean, and far from the humidity in order not to be rusted.
2. O-ring is between fast interface and piston tube is easily to be destroyed. If it is broken, please change as soon as possible.
3. The oil surface is often higher than the line of filter mantle; air can get in the pre-pressure pump without care to make it invalidity. Please tight the oil interface, and then the air will be out with the liquid. When it flows continuously, we can tight the interface again and re-start the function of pump.