New Alibaba EAC cooling tower film  fill media

Specification for EAC cooling tower fill film

  EAC Cooling Tower  material is one of the most important components for exchange of gas and water in cooling tower. It is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation.  With the development of the plastic industry, counter-current tower drench water plastic packing "S" shape ladder wave, obliquely wave, which has the heat dissipation ,good performance ,Ventilated small resistance, durable, based on the easy and other advantages, it is widely used in different types of large, medium, small, cooling tower.
 

Features EAC  cooling tower film packing fill media

1. Improved water distribution

2. High thermal performance

3. Material meets Cooling Tower Institute

4.Mainly apply to Counterflow fill.

Size: Any length*1330 width

Thickness:0.35-0.45mm

Application temperature: 75°C~35°C

Tensile StrengthMPa 23°C:55

Coefficient of heat conductivity(W/MK):0.14

Coefficient of themal expansion(<X10¯4K¯¹>):0.63

EAC cooling tower film packing fill media is suitable for:

• square counter-flow cooling tower
• cross-flow cooling tower
• high temperature cooling tower   
• Usage of EAC  cooling tower film packing fill media

Configuration

EAC manufactures two types of evaporative condensers: combined flow and counterflow.

Combined Flow

Combined flow is the use of both a condensing coil and fill surface for heat transfer in an evaporative condenser. The addition of fill surface to the traditional evaporative condenser design reduces evaporation in the coil section, reducing the potential for scaling and fouling. EAC’s combined flow evaporative condensers utilize parallel flow of air and spray water over the coil, and crossflow air/water flow through the fill surface.

In parallel flow, air and water flow over the coil in the same direction. In the fill section of EAC’s combined flow evaporative condensers, air and water interact in a crossflow configuration: water flows vertically down the fill as air flows horizontally across it.

Combined Flow: Parallel Flow of Air and Water Over the coil

Combined Flow: Crossflow Configuration Over the Fill

Counterflow

The flow of air through most factory assembled evaporative condensers is provided by one or more mechanically driven fans. The fan(s) may be axial or centrifugal, each type having its own distinct advantages.

More pictures of Eac  cooling tower film packing fill media

 It will be much appreciated if you can write the dimension and quantity in the inquiry.