LOW SILVER BRAZING ALLOY FILLER METAL STRIP 1% SILVER WELDING FLAT WIRE MANUFACTURER
USD $1 - $1,000 /Kilogram
Min.Order:800 Kilograms
Anhui Huazhong Welding Material Manufacturing Co., Ltd.
Main applications
Brazing alloy with 1% Ag
Factory Destination: HZ-Ag1B
This high quality welding and brazing alloy is an alloy of copper and zinc with small addition of silicium, silicon, nickel and manganese to assist deposition. This addition refines the alloy--HZ-Ag1B, lowers the melting range, improvingelectrical conductivity and increasing ductility.
Having a slightly lower melting range, is recommended for the brazing of galvanized steels, while protecting the zinc coat. Itshigh fluidity and good capillarity makes it suitable for brazing tricky works.
Heating can be achieved by induction, torch or by furnace.
Most used in lock-smithing and work shops.
A flux is necessary.
EN ISO 3677: B Cu 59 Zn Ag Si 850-870
Parameters | Analysis | Properties | Ø x L (mm) | manufacturer |
Melting range: 850-870 ° C | Cu: 58.0% Zn: balance Ag: 1.0% Others: Si,Mn,Sn | Rm: 480 Mpa A: 30% d: 8,5 g/cm³ | Bare and rods Ø 1,5 - 2 - 2,5 - 3 - 4 mm, standard length 500 mm and 1000mm. Wire:0.3-4.0mmAlso available in wire, ring strip and performs. | HUAZHONG |