Specifications

U-type style solar collector
2) SK SRCC CE ISO9001approved
3) highest efficiency
4) best quality
5) special

U-type style solar collector

 

 

The evacuated tubes which are slid onto a U shaped transfer unit absorb the sun energy and transform it into heat. The water or frost protection agent-water mixture flows through the U shaped conduit. As a result, the liquid gets heated. When the required temperature is reached, the pump in the solar circuit is activated by the controller and transports the heat to the hot water storage tank or the heating system..

 

Suitable for mains pressure water.

 

Since there is no water in the tubes itself, the tubes will not break in winter.

 

The collector is mountable on sloped or flat roofs.

 

Manifold connection(inch):1/2 3/4

Test pressure(pa):1MPa

Operating fluid ppressure(pa):0.6MPa

Max. service temperature:95

Max. stagnation temperature:200

Distance from tube to tube:75

Flow range recommendation:50-150l/m2h

Insulation thickness(mm):30

Min. collector angle(degree):15

Max. collector angle(degree):75

Inner pipe diameter(mm): 51mm

Stainless steel heat pipe diameter(mm): 16mm