Specifications

Direct Heated Dryer
1.Easy installation and stable performance
2.Professional manufacturer
3.China, factory

Rotary Dryer Introduction

Rotary dryer is suitable to dry metallic and nonmetallic mineral, clay in cement industrial and coal slime in coal mine,etc. Rotary dryer can be widely used to dry various materials, and it is simple to be operated.

 

Rotary Dryer Working Principle

The dryer is made up of a large, rotating cylindrical tube. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer.

 

Main Technical Parameters

type	transfers barrel diam(mm)	transfers barrel length(m)	gradient(°)	rotational speed(r/min)	weight(t)	power(kw)	volume(m³)
Φ0.6*8	Φ600	8	3°-5°	8	5.1	4	2.26
Φ0.8*10	Φ800	10	3°-5°	7.2	6.9	4	5.02
Φ1.0*10	Φ1000	10	3°-5°	6.73	7.5	5.5	7.85
Φ1.2*12	Φ1200	12	3°-5°	5.8	13.1	11	13.31
Φ1.5*12	Φ1500	12	3°-5°	4.8	22.3	15	21.2
Φ1.8*14	Φ1800	14	3°-5°	3.2	45.8	30	48.22
Φ2.2*18	Φ2200	18	3°-5°	3	50.3	37	70.43
Φ2.4*20	Φ2400	20	3°-5°	2.83	78.4	45	90.43
Φ2.8*24	Φ2800	24	3°-5°	2.59	97	75	147.8

 

 

 

Henan Libo Mining Machinery Co.,Ltd is a joint-stock enterprise that produces industrial forming R&D, production and sales into an integral system. Our main products are crushing plans,grinding mill machines,drying equipments and other mining machines.