CE RoHS LED indicator DR-75-24 for LED strip Single output 75w 48v din rail power supply
USD $15.68 - $17.77 /Piece
Min.Order:1 Piece
Yueqing Leyu Electric Automation Co., Ltd.
MDR-40-12 single output power supply CE RoHS Din Rail Mounted Power Supply 40W 12V
Professional manufacturer MDR 40w 5v 6a din rail Switching Power Supply MDR-40-5
40W CE Rohs approved mini size DIN Rail Switched SMPS MDR-40-12 mini din rail power supply
CE RoHS approved 40w mini size din rail switch power supply MDR-40 single output power supplies
CE Rohs approved small din rail Switched power supply 48v SMPS 40W MDR-40-48
CE RoHS LED indicator DR-75-24 for LED strip Single output 75w 48v power supply
75w 48v power supply
Specification:
75W Single Output Industrial DIN Rail Power Supply DR-75 series
Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage/ Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 50KHz
1 year warranty
SPECIFICATIONS | |||
OUTPUT |
| ||
Model | DR-75-12 | DR-75-24 | DR-75-48 |
DC Voltage | 12V | 24V | 48V |
Rated Current | 6.3A | 3.2A | 1.6A |
Current Range | 0-6.3A | 0-3.2A | 0-1.6A |
Rated Power | 75.6W | 76.8W | 76.8W |
Ripple & Noise | 100mVp-p | 150mVp-p | 240mVp-p |
Voltage Adj. Range | 12-14V | 24-28V | 48-53V |
Voltage Tolerance | ±2% | ±1% | ±1% |
Setup, Rise Time | 1000ms,60ms/230VAC 1800ms,60ms/115VAC at full load | ||
Hold Up Time | 60ms/230VAC 12ms/115VAC at full load | ||
|
| ||
INPUT |
| ||
Voltage Range | 85~264VAC 47~63 Hz; 120~370VDC | ||
AC Current | 1.6A/115V 0.96A/230V | ||
Efficiency | 76% | 80% | 81% |
Inrush Current | Cold start 20A/115VAC 40A/230VAC | ||
Leakage Current | <1mA/240VAC | ||
|
| ||
PROTECTION |
| ||
Over Load | 105%~150% | ||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||
Over Voltage | 120%~140% | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||
Over Temp. | TSW1≥85℃±5℃ | ||
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down | |||
|
| ||
ENVIRONMENT |
| ||
Working Temp., Humidity | -10℃~+60℃; 20%~90%RH | ||
Storage Temp., Humidity | -20℃~+85℃; 10%~95%RH | ||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||
|
| ||
SAFETY |
| ||
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC | ||
|
| ||
STANDARD |
| ||
Safety Standard | Design refer to UL508,TUV EN60950-1 | ||
EMC Standard | EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2 | ||
|
| ||
OTHERS |
| ||
Dimension | 55.5*125.2*100mm(L*W*H) | ||
Weight | 0.6Kg | ||
Packing | 20pcs/13Kg/1.1CUFT | ||
|
| ||
NOTE |
| ||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
Detailed photos :
Grace is waiting for your kind inquiry !