Technical Parameters

  Additional configuration

1. Driven unit: Many worldwide famous brands are for option: SEW, ABB, Siemens and so on
2. Bearings: NSK/TNT and so on 
3. Heating/cooling jacket: water, oil, steam as the cooling or heating medium 
4. Spraying system
5. Heavy duty type ( loading your material into the mixer first and then start the mixer)
6. Platform: we build the platform for you or we design it and you build it locally
7. Mixing system: including packing machine, bucket elevator, Sieve, screw conveyor and so.
8. Customizing according to client’s specific requirement 
9. High speed choppers can be added inside the mixing tank to promote the mixing effect

 mixers need to be customized according to the different cases, the cases are as below:
1. Agglomerated material larger than 5mm is contained in the raw material
2. Bulk density of the raw material bigger than 3kg/l
3. Materials that are easy to get damp and not allowed to be exposed to the atmosphere, the mixer need to be vacuumized or negative pressure
4. Fill compressed air to the mixer barrel, and keep the pressure
5. Material with a large friction coefficient, mixer need to do a special Wear-resistant surface treatment
6. Material is not allowed to contact with the metal surface during mixing process 
7. Mixer need to be heated up to 200 Celsius degree
8. Heavy duty (loading material into mixer before turning on it) is required.

Our Factory 

If you want to send inquriy to me about our product, could you please tell me?

1)  What material you want to grind, is it dry, what is the size of feed material ?

 2)  What capacity you expect ? (kg/h)

 3)  What mesh or mm or micron(size) of the powder you want?

 4 ) What voltage you want? For example, 380V 50hz 3p; 440V 60Hz,3p; 220V...etc.

    (We only provide 3P, because our machines are all for industrial use,not for family.)

 5)  Usually we use stainless steel 304, if you want stainless steel 316, it's OK and please tell us.

 Then our communication will be more efficient.