Specifications

XCMG Motor Grader GR300
1. Engine: 6CTA8.3
2. Operating weight: 16500kg
3. Max. depth of cutting: 500mm

XCMG Motor Grader GR215

 

Feature

 

The XCMG GR Series Motor Graders are mainly used in grond leveling, canalling, slopeing, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on. They are necessary construction machines for national defence engineering, mine construction, town and country roads building, and farmland improvement.

 

Performance and characteristic:

 

1.      New appearance design.

2.      The articulation frame is adopted and macthed with the steering of the front wheel, with small turning radius, maneuvering and flexible.

3.      The electro-hydraulic controls the power shift gearbox, with 6 ahead box and 3 back gears.

4.      The international matching hydraulic parts are adopted, with reliable operation.

5.      The motions of the knife are fully hydraulically controlled.

6.      The rear axle is the three-section driving axle which is provide with the NO-SPIN self-locking differential mechanism.

7.      The manipulation table and seats are adjustable. The arrgement of the manipulation handle and instruments are reasonable, with convenient application, and the comfprt of driving is improved.

8.      The cab is grand and nice, with wide eyeshot and good sealing.

9.      The front bolldozing plate,rear scarification device, front scarification harrow and automatic leveling device can be added. 

 

Main technical specification

 

 

 

 

Basic specification
Engine model	QSL9
Rated power/speed	224kW/2100rpm
Dimension(LxWxH)	10500×3100×3550mm
Operating weight(Standard)	26000kg
Performance specification
Travelling speed ,forward	5,8,11,19,23,40 km/h
Travelling speed ,reverse	5,11,23 km/h
Tractive force(f=0.75)	140KN
Max. gradeability	30%
Tire inflation pressure	350 kPa
Working hydraulic pressure	16 MPa
Transmission pressure	1.3~1.8MPa
Operating specification
Max. steering angle of front wheels	±50°
Max. lean angle of front wheels	±17°
Max. oscillation angle of front axle	±15°
Max. oscillation angle of balance box	15
Frame articulation angle	±27°
Min. turning radius using articulation	8.0m
Biade
Maximum lift above ground	450mm
Maximum depth of cutting	500mm
Maximum blade position angle	90°
Blade cutting angle	28°—70°
Circle reversing rotation	360°
Moldboard width X height	4920×787mm

 

 

 

 

Thank you for your inquiry!